medcat.config.config_meta_cat ============================= .. py:module:: medcat.config.config_meta_cat Attributes ---------- .. autoapisummary:: medcat.config.config_meta_cat.logger Classes ------- .. autoapisummary:: medcat.config.config_meta_cat.DirtiableBaseModel medcat.config.config_meta_cat.ComponentConfig medcat.config.config_meta_cat.AvailableSerialisers medcat.config.config_meta_cat.General medcat.config.config_meta_cat.Model medcat.config.config_meta_cat.Train medcat.config.config_meta_cat.ConfigMetaCAT Module Contents --------------- .. py:class:: DirtiableBaseModel(/, **data) Bases: :py:obj:`SerialisableBaseModel` The base serialisable config. .. py:attribute:: _is_dirty :type: bool :value: False .. py:method:: __setattr__(name, value) .. py:property:: is_dirty :type: bool .. py:method:: mark_clean() .. py:method:: get_strategy() .. py:method:: get_init_attrs() :classmethod: .. py:method:: ignore_attrs() :classmethod: .. py:method:: include_properties() :classmethod: .. py:method:: merge_config(other) Merge this config with another config's (partial) model dump. The exepctation is that the `other` dict is a partial model dump. Values specified there are overwritten into the current config. Values not specified there are left intact. The `other` config can have keys/values that do not exist in the config or sub-config. And they will be added where possible. :param other: The model dump :type other: dict :raises IncorrectConfigValues: If unable to set the attribute, trying to set incorrect value, or trying to set sub-config values in an incorrect format (non-dict). .. py:method:: load(path) :classmethod: .. py:attribute:: model_config :type: ClassVar[pydantic.config.ConfigDict] Configuration for the model, should be a dictionary conforming to [`ConfigDict`][pydantic.config.ConfigDict]. .. py:attribute:: model_fields :type: ClassVar[Dict[str, pydantic.fields.FieldInfo]] Metadata about the fields defined on the model, mapping of field names to [`FieldInfo`][pydantic.fields.FieldInfo] objects. This replaces `Model.__fields__` from Pydantic V1. .. py:attribute:: model_computed_fields :type: ClassVar[Dict[str, pydantic.fields.ComputedFieldInfo]] A dictionary of computed field names and their corresponding `ComputedFieldInfo` objects. .. py:attribute:: __class_vars__ :type: ClassVar[set[str]] The names of the class variables defined on the model. .. py:attribute:: __private_attributes__ :type: ClassVar[Dict[str, pydantic.fields.ModelPrivateAttr]] Metadata about the private attributes of the model. .. py:attribute:: __signature__ :type: ClassVar[inspect.Signature] The synthesized `__init__` [`Signature`][inspect.Signature] of the model. .. py:attribute:: __pydantic_complete__ :type: ClassVar[bool] :value: False Whether model building is completed, or if there are still undefined fields. .. py:attribute:: __pydantic_core_schema__ :type: ClassVar[pydantic_core.CoreSchema] The core schema of the model. .. py:attribute:: __pydantic_custom_init__ :type: ClassVar[bool] Whether the model has a custom `__init__` method. .. py:attribute:: __pydantic_decorators__ :type: ClassVar[pydantic._internal._decorators.DecoratorInfos] Metadata containing the decorators defined on the model. This replaces `Model.__validators__` and `Model.__root_validators__` from Pydantic V1. .. py:attribute:: __pydantic_generic_metadata__ :type: ClassVar[pydantic._internal._generics.PydanticGenericMetadata] Metadata for generic models; contains data used for a similar purpose to __args__, __origin__, __parameters__ in typing-module generics. May eventually be replaced by these. .. py:attribute:: __pydantic_parent_namespace__ :type: ClassVar[Dict[str, Any] | None] :value: None Parent namespace of the model, used for automatic rebuilding of models. .. py:attribute:: __pydantic_post_init__ :type: ClassVar[None | Literal['model_post_init']] The name of the post-init method for the model, if defined. .. py:attribute:: __pydantic_root_model__ :type: ClassVar[bool] :value: False Whether the model is a [`RootModel`][pydantic.root_model.RootModel]. .. py:attribute:: __pydantic_serializer__ :type: ClassVar[pydantic_core.SchemaSerializer] The `pydantic-core` `SchemaSerializer` used to dump instances of the model. .. py:attribute:: __pydantic_validator__ :type: ClassVar[pydantic_core.SchemaValidator | pydantic.plugin._schema_validator.PluggableSchemaValidator] The `pydantic-core` `SchemaValidator` used to validate instances of the model. .. py:attribute:: __pydantic_extra__ :type: dict[str, Any] | None A dictionary containing extra values, if [`extra`][pydantic.config.ConfigDict.extra] is set to `'allow'`. .. py:attribute:: __pydantic_fields_set__ :type: set[str] The names of fields explicitly set during instantiation. .. py:attribute:: __pydantic_private__ :type: dict[str, Any] | None Values of private attributes set on the model instance. .. py:attribute:: __slots__ :value: ('__dict__', '__pydantic_fields_set__', '__pydantic_extra__', '__pydantic_private__') .. py:method:: __init__(/, **data) Create a new model by parsing and validating input data from keyword arguments. Raises [`ValidationError`][pydantic_core.ValidationError] if the input data cannot be validated to form a valid model. `self` is explicitly positional-only to allow `self` as a field name. .. py:property:: model_extra :type: dict[str, Any] | None Get extra fields set during validation. :Returns: **A dictionary of extra fields, or `None` if `config.extra` is not set to `"allow"`.** .. py:property:: model_fields_set :type: set[str] Returns the set of fields that have been explicitly set on this model instance. :Returns: **A set of strings representing the fields that have been set,** -- i.e. that were not filled from defaults. .. py:method:: model_construct(_fields_set = None, **values) :classmethod: Creates a new instance of the `Model` class with validated data. Creates a new model setting `__dict__` and `__pydantic_fields_set__` from trusted or pre-validated data. Default values are respected, but no other validation is performed. !!! note `model_construct()` generally respects the `model_config.extra` setting on the provided model. That is, if `model_config.extra == 'allow'`, then all extra passed values are added to the model instance's `__dict__` and `__pydantic_extra__` fields. If `model_config.extra == 'ignore'` (the default), then all extra passed values are ignored. Because no validation is performed with a call to `model_construct()`, having `model_config.extra == 'forbid'` does not result in an error if extra values are passed, but they will be ignored. :param _fields_set: A set of field names that were originally explicitly set during instantiation. If provided, this is directly used for the [`model_fields_set`][pydantic.BaseModel.model_fields_set] attribute. Otherwise, the field names from the `values` argument will be used. :param values: Trusted or pre-validated data dictionary. :Returns: **A new instance of the `Model` class with validated data.** .. py:method:: model_copy(*, update = None, deep = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#model_copy Returns a copy of the model. :param update: Values to change/add in the new model. Note: the data is not validated before creating the new model. You should trust this data. :param deep: Set to `True` to make a deep copy of the model. :Returns: **New model instance.** .. py:method:: model_dump(*, mode = 'python', include = None, exclude = None, context = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, round_trip = False, warnings = True, serialize_as_any = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#modelmodel_dump Generate a dictionary representation of the model, optionally specifying which fields to include or exclude. :param mode: The mode in which `to_python` should run. If mode is 'json', the output will only contain JSON serializable types. If mode is 'python', the output may contain non-JSON-serializable Python objects. :param include: A set of fields to include in the output. :param exclude: A set of fields to exclude from the output. :param context: Additional context to pass to the serializer. :param by_alias: Whether to use the field's alias in the dictionary key if defined. :param exclude_unset: Whether to exclude fields that have not been explicitly set. :param exclude_defaults: Whether to exclude fields that are set to their default value. :param exclude_none: Whether to exclude fields that have a value of `None`. :param round_trip: If True, dumped values should be valid as input for non-idempotent types such as Json[T]. :param warnings: How to handle serialization errors. False/"none" ignores them, True/"warn" logs errors, "error" raises a [`PydanticSerializationError`][pydantic_core.PydanticSerializationError]. :param serialize_as_any: Whether to serialize fields with duck-typing serialization behavior. :Returns: **A dictionary representation of the model.** .. py:method:: model_dump_json(*, indent = None, include = None, exclude = None, context = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, round_trip = False, warnings = True, serialize_as_any = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#modelmodel_dump_json Generates a JSON representation of the model using Pydantic's `to_json` method. :param indent: Indentation to use in the JSON output. If None is passed, the output will be compact. :param include: Field(s) to include in the JSON output. :param exclude: Field(s) to exclude from the JSON output. :param context: Additional context to pass to the serializer. :param by_alias: Whether to serialize using field aliases. :param exclude_unset: Whether to exclude fields that have not been explicitly set. :param exclude_defaults: Whether to exclude fields that are set to their default value. :param exclude_none: Whether to exclude fields that have a value of `None`. :param round_trip: If True, dumped values should be valid as input for non-idempotent types such as Json[T]. :param warnings: How to handle serialization errors. False/"none" ignores them, True/"warn" logs errors, "error" raises a [`PydanticSerializationError`][pydantic_core.PydanticSerializationError]. :param serialize_as_any: Whether to serialize fields with duck-typing serialization behavior. :Returns: **A JSON string representation of the model.** .. py:method:: model_json_schema(by_alias = True, ref_template = DEFAULT_REF_TEMPLATE, schema_generator = GenerateJsonSchema, mode = 'validation') :classmethod: Generates a JSON schema for a model class. :param by_alias: Whether to use attribute aliases or not. :param ref_template: The reference template. :param schema_generator: To override the logic used to generate the JSON schema, as a subclass of `GenerateJsonSchema` with your desired modifications :param mode: The mode in which to generate the schema. :Returns: **The JSON schema for the given model class.** .. py:method:: model_parametrized_name(params) :classmethod: Compute the class name for parametrizations of generic classes. This method can be overridden to achieve a custom naming scheme for generic BaseModels. :param params: Tuple of types of the class. Given a generic class `Model` with 2 type variables and a concrete model `Model[str, int]`, the value `(str, int)` would be passed to `params`. :Returns: **String representing the new class where `params` are passed to `cls` as type variables.** :raises TypeError: Raised when trying to generate concrete names for non-generic models. .. py:method:: model_post_init(__context) Override this method to perform additional initialization after `__init__` and `model_construct`. This is useful if you want to do some validation that requires the entire model to be initialized. .. py:method:: model_rebuild(*, force = False, raise_errors = True, _parent_namespace_depth = 2, _types_namespace = None) :classmethod: Try to rebuild the pydantic-core schema for the model. This may be necessary when one of the annotations is a ForwardRef which could not be resolved during the initial attempt to build the schema, and automatic rebuilding fails. :param force: Whether to force the rebuilding of the model schema, defaults to `False`. :param raise_errors: Whether to raise errors, defaults to `True`. :param _parent_namespace_depth: The depth level of the parent namespace, defaults to 2. :param _types_namespace: The types namespace, defaults to `None`. :Returns: * **Returns `None` if the schema is already "complete" and rebuilding was not required.** * **If rebuilding _was_ required, returns `True` if rebuilding was successful, otherwise `False`.** .. py:method:: model_validate(obj, *, strict = None, from_attributes = None, context = None) :classmethod: Validate a pydantic model instance. :param obj: The object to validate. :param strict: Whether to enforce types strictly. :param from_attributes: Whether to extract data from object attributes. :param context: Additional context to pass to the validator. :raises ValidationError: If the object could not be validated. :Returns: **The validated model instance.** .. py:method:: model_validate_json(json_data, *, strict = None, context = None) :classmethod: Usage docs: https://docs.pydantic.dev/2.9/concepts/json/#json-parsing Validate the given JSON data against the Pydantic model. :param json_data: The JSON data to validate. :param strict: Whether to enforce types strictly. :param context: Extra variables to pass to the validator. :Returns: **The validated Pydantic model.** :raises ValidationError: If `json_data` is not a JSON string or the object could not be validated. .. py:method:: model_validate_strings(obj, *, strict = None, context = None) :classmethod: Validate the given object with string data against the Pydantic model. :param obj: The object containing string data to validate. :param strict: Whether to enforce types strictly. :param context: Extra variables to pass to the validator. :Returns: **The validated Pydantic model.** .. py:method:: __get_pydantic_core_schema__(source, handler, /) :classmethod: Hook into generating the model's CoreSchema. :param source: The class we are generating a schema for. This will generally be the same as the `cls` argument if this is a classmethod. :param handler: A callable that calls into Pydantic's internal CoreSchema generation logic. :Returns: **A `pydantic-core` `CoreSchema`.** .. py:method:: __get_pydantic_json_schema__(core_schema, handler, /) :classmethod: Hook into generating the model's JSON schema. :param core_schema: A `pydantic-core` CoreSchema. You can ignore this argument and call the handler with a new CoreSchema, wrap this CoreSchema (`{'type': 'nullable', 'schema': current_schema}`), or just call the handler with the original schema. :param handler: Call into Pydantic's internal JSON schema generation. This will raise a `pydantic.errors.PydanticInvalidForJsonSchema` if JSON schema generation fails. Since this gets called by `BaseModel.model_json_schema` you can override the `schema_generator` argument to that function to change JSON schema generation globally for a type. :Returns: **A JSON schema, as a Python object.** .. py:method:: __pydantic_init_subclass__(**kwargs) :classmethod: This is intended to behave just like `__init_subclass__`, but is called by `ModelMetaclass` only after the class is actually fully initialized. In particular, attributes like `model_fields` will be present when this is called. This is necessary because `__init_subclass__` will always be called by `type.__new__`, and it would require a prohibitively large refactor to the `ModelMetaclass` to ensure that `type.__new__` was called in such a manner that the class would already be sufficiently initialized. This will receive the same `kwargs` that would be passed to the standard `__init_subclass__`, namely, any kwargs passed to the class definition that aren't used internally by pydantic. :param \*\*kwargs: Any keyword arguments passed to the class definition that aren't used internally by pydantic. .. py:method:: __class_getitem__(typevar_values) :classmethod: .. py:method:: __copy__() Returns a shallow copy of the model. .. py:method:: __deepcopy__(memo = None) Returns a deep copy of the model. .. py:method:: __getattr__(item) .. py:method:: _check_frozen(name, value) .. py:method:: __getstate__() .. py:method:: __setstate__(state) .. py:method:: __eq__(other) .. py:method:: __init_subclass__(**kwargs) :classmethod: This signature is included purely to help type-checkers check arguments to class declaration, which provides a way to conveniently set model_config key/value pairs. ```py from pydantic import BaseModel class MyModel(BaseModel, extra='allow'): ... ``` However, this may be deceiving, since the _actual_ calls to `__init_subclass__` will not receive any of the config arguments, and will only receive any keyword arguments passed during class initialization that are _not_ expected keys in ConfigDict. (This is due to the way `ModelMetaclass.__new__` works.) :param \*\*kwargs: Keyword arguments passed to the class definition, which set model_config .. note:: You may want to override `__pydantic_init_subclass__` instead, which behaves similarly but is called *after* the class is fully initialized. .. py:method:: __iter__() So `dict(model)` works. .. py:method:: __repr__() .. py:method:: __repr_args__() .. py:attribute:: __repr_name__ .. py:attribute:: __repr_str__ .. py:attribute:: __pretty__ .. py:attribute:: __rich_repr__ .. py:method:: __str__() .. py:property:: __fields__ :type: dict[str, pydantic.fields.FieldInfo] .. py:property:: __fields_set__ :type: set[str] .. py:method:: dict(*, include = None, exclude = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False) .. py:method:: json(*, include = None, exclude = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, encoder = PydanticUndefined, models_as_dict = PydanticUndefined, **dumps_kwargs) .. py:method:: parse_obj(obj) :classmethod: .. py:method:: parse_raw(b, *, content_type = None, encoding = 'utf8', proto = None, allow_pickle = False) :classmethod: .. py:method:: parse_file(path, *, content_type = None, encoding = 'utf8', proto = None, allow_pickle = False) :classmethod: .. py:method:: from_orm(obj) :classmethod: .. py:method:: construct(_fields_set = None, **values) :classmethod: .. py:method:: copy(*, include = None, exclude = None, update = None, deep = False) Returns a copy of the model. !!! warning "Deprecated" This method is now deprecated; use `model_copy` instead. If you need `include` or `exclude`, use: ```py data = self.model_dump(include=include, exclude=exclude, round_trip=True) data = {**data, **(update or {})} copied = self.model_validate(data) ``` :param include: Optional set or mapping specifying which fields to include in the copied model. :param exclude: Optional set or mapping specifying which fields to exclude in the copied model. :param update: Optional dictionary of field-value pairs to override field values in the copied model. :param deep: If True, the values of fields that are Pydantic models will be deep-copied. :Returns: **A copy of the model with included, excluded and updated fields as specified.** .. py:method:: schema(by_alias = True, ref_template = DEFAULT_REF_TEMPLATE) :classmethod: .. py:method:: schema_json(*, by_alias = True, ref_template = DEFAULT_REF_TEMPLATE, **dumps_kwargs) :classmethod: .. py:method:: validate(value) :classmethod: .. py:method:: update_forward_refs(**localns) :classmethod: .. py:method:: _iter(*args, **kwargs) .. py:method:: _copy_and_set_values(*args, **kwargs) .. py:method:: _get_value(*args, **kwargs) :classmethod: .. py:method:: _calculate_keys(*args, **kwargs) .. py:class:: ComponentConfig(/, **data) Bases: :py:obj:`DirtiableBaseModel` The base serialisable config. .. py:attribute:: comp_name :type: str :value: 'default' The name of the component. If a custom implementation is required, it needs to be registered using `medcat.components.types.register_core_component( , , ) By default, only the 'default' component is registered. .. py:attribute:: _is_dirty :type: bool :value: False .. py:method:: __setattr__(name, value) .. py:property:: is_dirty :type: bool .. py:method:: mark_clean() .. py:method:: get_strategy() .. py:method:: get_init_attrs() :classmethod: .. py:method:: ignore_attrs() :classmethod: .. py:method:: include_properties() :classmethod: .. py:method:: merge_config(other) Merge this config with another config's (partial) model dump. The exepctation is that the `other` dict is a partial model dump. Values specified there are overwritten into the current config. Values not specified there are left intact. The `other` config can have keys/values that do not exist in the config or sub-config. And they will be added where possible. :param other: The model dump :type other: dict :raises IncorrectConfigValues: If unable to set the attribute, trying to set incorrect value, or trying to set sub-config values in an incorrect format (non-dict). .. py:method:: load(path) :classmethod: .. py:attribute:: model_config :type: ClassVar[pydantic.config.ConfigDict] Configuration for the model, should be a dictionary conforming to [`ConfigDict`][pydantic.config.ConfigDict]. .. py:attribute:: model_fields :type: ClassVar[Dict[str, pydantic.fields.FieldInfo]] Metadata about the fields defined on the model, mapping of field names to [`FieldInfo`][pydantic.fields.FieldInfo] objects. This replaces `Model.__fields__` from Pydantic V1. .. py:attribute:: model_computed_fields :type: ClassVar[Dict[str, pydantic.fields.ComputedFieldInfo]] A dictionary of computed field names and their corresponding `ComputedFieldInfo` objects. .. py:attribute:: __class_vars__ :type: ClassVar[set[str]] The names of the class variables defined on the model. .. py:attribute:: __private_attributes__ :type: ClassVar[Dict[str, pydantic.fields.ModelPrivateAttr]] Metadata about the private attributes of the model. .. py:attribute:: __signature__ :type: ClassVar[inspect.Signature] The synthesized `__init__` [`Signature`][inspect.Signature] of the model. .. py:attribute:: __pydantic_complete__ :type: ClassVar[bool] :value: False Whether model building is completed, or if there are still undefined fields. .. py:attribute:: __pydantic_core_schema__ :type: ClassVar[pydantic_core.CoreSchema] The core schema of the model. .. py:attribute:: __pydantic_custom_init__ :type: ClassVar[bool] Whether the model has a custom `__init__` method. .. py:attribute:: __pydantic_decorators__ :type: ClassVar[pydantic._internal._decorators.DecoratorInfos] Metadata containing the decorators defined on the model. This replaces `Model.__validators__` and `Model.__root_validators__` from Pydantic V1. .. py:attribute:: __pydantic_generic_metadata__ :type: ClassVar[pydantic._internal._generics.PydanticGenericMetadata] Metadata for generic models; contains data used for a similar purpose to __args__, __origin__, __parameters__ in typing-module generics. May eventually be replaced by these. .. py:attribute:: __pydantic_parent_namespace__ :type: ClassVar[Dict[str, Any] | None] :value: None Parent namespace of the model, used for automatic rebuilding of models. .. py:attribute:: __pydantic_post_init__ :type: ClassVar[None | Literal['model_post_init']] The name of the post-init method for the model, if defined. .. py:attribute:: __pydantic_root_model__ :type: ClassVar[bool] :value: False Whether the model is a [`RootModel`][pydantic.root_model.RootModel]. .. py:attribute:: __pydantic_serializer__ :type: ClassVar[pydantic_core.SchemaSerializer] The `pydantic-core` `SchemaSerializer` used to dump instances of the model. .. py:attribute:: __pydantic_validator__ :type: ClassVar[pydantic_core.SchemaValidator | pydantic.plugin._schema_validator.PluggableSchemaValidator] The `pydantic-core` `SchemaValidator` used to validate instances of the model. .. py:attribute:: __pydantic_extra__ :type: dict[str, Any] | None A dictionary containing extra values, if [`extra`][pydantic.config.ConfigDict.extra] is set to `'allow'`. .. py:attribute:: __pydantic_fields_set__ :type: set[str] The names of fields explicitly set during instantiation. .. py:attribute:: __pydantic_private__ :type: dict[str, Any] | None Values of private attributes set on the model instance. .. py:attribute:: __slots__ :value: ('__dict__', '__pydantic_fields_set__', '__pydantic_extra__', '__pydantic_private__') .. py:method:: __init__(/, **data) Create a new model by parsing and validating input data from keyword arguments. Raises [`ValidationError`][pydantic_core.ValidationError] if the input data cannot be validated to form a valid model. `self` is explicitly positional-only to allow `self` as a field name. .. py:property:: model_extra :type: dict[str, Any] | None Get extra fields set during validation. :Returns: **A dictionary of extra fields, or `None` if `config.extra` is not set to `"allow"`.** .. py:property:: model_fields_set :type: set[str] Returns the set of fields that have been explicitly set on this model instance. :Returns: **A set of strings representing the fields that have been set,** -- i.e. that were not filled from defaults. .. py:method:: model_construct(_fields_set = None, **values) :classmethod: Creates a new instance of the `Model` class with validated data. Creates a new model setting `__dict__` and `__pydantic_fields_set__` from trusted or pre-validated data. Default values are respected, but no other validation is performed. !!! note `model_construct()` generally respects the `model_config.extra` setting on the provided model. That is, if `model_config.extra == 'allow'`, then all extra passed values are added to the model instance's `__dict__` and `__pydantic_extra__` fields. If `model_config.extra == 'ignore'` (the default), then all extra passed values are ignored. Because no validation is performed with a call to `model_construct()`, having `model_config.extra == 'forbid'` does not result in an error if extra values are passed, but they will be ignored. :param _fields_set: A set of field names that were originally explicitly set during instantiation. If provided, this is directly used for the [`model_fields_set`][pydantic.BaseModel.model_fields_set] attribute. Otherwise, the field names from the `values` argument will be used. :param values: Trusted or pre-validated data dictionary. :Returns: **A new instance of the `Model` class with validated data.** .. py:method:: model_copy(*, update = None, deep = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#model_copy Returns a copy of the model. :param update: Values to change/add in the new model. Note: the data is not validated before creating the new model. You should trust this data. :param deep: Set to `True` to make a deep copy of the model. :Returns: **New model instance.** .. py:method:: model_dump(*, mode = 'python', include = None, exclude = None, context = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, round_trip = False, warnings = True, serialize_as_any = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#modelmodel_dump Generate a dictionary representation of the model, optionally specifying which fields to include or exclude. :param mode: The mode in which `to_python` should run. If mode is 'json', the output will only contain JSON serializable types. If mode is 'python', the output may contain non-JSON-serializable Python objects. :param include: A set of fields to include in the output. :param exclude: A set of fields to exclude from the output. :param context: Additional context to pass to the serializer. :param by_alias: Whether to use the field's alias in the dictionary key if defined. :param exclude_unset: Whether to exclude fields that have not been explicitly set. :param exclude_defaults: Whether to exclude fields that are set to their default value. :param exclude_none: Whether to exclude fields that have a value of `None`. :param round_trip: If True, dumped values should be valid as input for non-idempotent types such as Json[T]. :param warnings: How to handle serialization errors. False/"none" ignores them, True/"warn" logs errors, "error" raises a [`PydanticSerializationError`][pydantic_core.PydanticSerializationError]. :param serialize_as_any: Whether to serialize fields with duck-typing serialization behavior. :Returns: **A dictionary representation of the model.** .. py:method:: model_dump_json(*, indent = None, include = None, exclude = None, context = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, round_trip = False, warnings = True, serialize_as_any = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#modelmodel_dump_json Generates a JSON representation of the model using Pydantic's `to_json` method. :param indent: Indentation to use in the JSON output. If None is passed, the output will be compact. :param include: Field(s) to include in the JSON output. :param exclude: Field(s) to exclude from the JSON output. :param context: Additional context to pass to the serializer. :param by_alias: Whether to serialize using field aliases. :param exclude_unset: Whether to exclude fields that have not been explicitly set. :param exclude_defaults: Whether to exclude fields that are set to their default value. :param exclude_none: Whether to exclude fields that have a value of `None`. :param round_trip: If True, dumped values should be valid as input for non-idempotent types such as Json[T]. :param warnings: How to handle serialization errors. False/"none" ignores them, True/"warn" logs errors, "error" raises a [`PydanticSerializationError`][pydantic_core.PydanticSerializationError]. :param serialize_as_any: Whether to serialize fields with duck-typing serialization behavior. :Returns: **A JSON string representation of the model.** .. py:method:: model_json_schema(by_alias = True, ref_template = DEFAULT_REF_TEMPLATE, schema_generator = GenerateJsonSchema, mode = 'validation') :classmethod: Generates a JSON schema for a model class. :param by_alias: Whether to use attribute aliases or not. :param ref_template: The reference template. :param schema_generator: To override the logic used to generate the JSON schema, as a subclass of `GenerateJsonSchema` with your desired modifications :param mode: The mode in which to generate the schema. :Returns: **The JSON schema for the given model class.** .. py:method:: model_parametrized_name(params) :classmethod: Compute the class name for parametrizations of generic classes. This method can be overridden to achieve a custom naming scheme for generic BaseModels. :param params: Tuple of types of the class. Given a generic class `Model` with 2 type variables and a concrete model `Model[str, int]`, the value `(str, int)` would be passed to `params`. :Returns: **String representing the new class where `params` are passed to `cls` as type variables.** :raises TypeError: Raised when trying to generate concrete names for non-generic models. .. py:method:: model_post_init(__context) Override this method to perform additional initialization after `__init__` and `model_construct`. This is useful if you want to do some validation that requires the entire model to be initialized. .. py:method:: model_rebuild(*, force = False, raise_errors = True, _parent_namespace_depth = 2, _types_namespace = None) :classmethod: Try to rebuild the pydantic-core schema for the model. This may be necessary when one of the annotations is a ForwardRef which could not be resolved during the initial attempt to build the schema, and automatic rebuilding fails. :param force: Whether to force the rebuilding of the model schema, defaults to `False`. :param raise_errors: Whether to raise errors, defaults to `True`. :param _parent_namespace_depth: The depth level of the parent namespace, defaults to 2. :param _types_namespace: The types namespace, defaults to `None`. :Returns: * **Returns `None` if the schema is already "complete" and rebuilding was not required.** * **If rebuilding _was_ required, returns `True` if rebuilding was successful, otherwise `False`.** .. py:method:: model_validate(obj, *, strict = None, from_attributes = None, context = None) :classmethod: Validate a pydantic model instance. :param obj: The object to validate. :param strict: Whether to enforce types strictly. :param from_attributes: Whether to extract data from object attributes. :param context: Additional context to pass to the validator. :raises ValidationError: If the object could not be validated. :Returns: **The validated model instance.** .. py:method:: model_validate_json(json_data, *, strict = None, context = None) :classmethod: Usage docs: https://docs.pydantic.dev/2.9/concepts/json/#json-parsing Validate the given JSON data against the Pydantic model. :param json_data: The JSON data to validate. :param strict: Whether to enforce types strictly. :param context: Extra variables to pass to the validator. :Returns: **The validated Pydantic model.** :raises ValidationError: If `json_data` is not a JSON string or the object could not be validated. .. py:method:: model_validate_strings(obj, *, strict = None, context = None) :classmethod: Validate the given object with string data against the Pydantic model. :param obj: The object containing string data to validate. :param strict: Whether to enforce types strictly. :param context: Extra variables to pass to the validator. :Returns: **The validated Pydantic model.** .. py:method:: __get_pydantic_core_schema__(source, handler, /) :classmethod: Hook into generating the model's CoreSchema. :param source: The class we are generating a schema for. This will generally be the same as the `cls` argument if this is a classmethod. :param handler: A callable that calls into Pydantic's internal CoreSchema generation logic. :Returns: **A `pydantic-core` `CoreSchema`.** .. py:method:: __get_pydantic_json_schema__(core_schema, handler, /) :classmethod: Hook into generating the model's JSON schema. :param core_schema: A `pydantic-core` CoreSchema. You can ignore this argument and call the handler with a new CoreSchema, wrap this CoreSchema (`{'type': 'nullable', 'schema': current_schema}`), or just call the handler with the original schema. :param handler: Call into Pydantic's internal JSON schema generation. This will raise a `pydantic.errors.PydanticInvalidForJsonSchema` if JSON schema generation fails. Since this gets called by `BaseModel.model_json_schema` you can override the `schema_generator` argument to that function to change JSON schema generation globally for a type. :Returns: **A JSON schema, as a Python object.** .. py:method:: __pydantic_init_subclass__(**kwargs) :classmethod: This is intended to behave just like `__init_subclass__`, but is called by `ModelMetaclass` only after the class is actually fully initialized. In particular, attributes like `model_fields` will be present when this is called. This is necessary because `__init_subclass__` will always be called by `type.__new__`, and it would require a prohibitively large refactor to the `ModelMetaclass` to ensure that `type.__new__` was called in such a manner that the class would already be sufficiently initialized. This will receive the same `kwargs` that would be passed to the standard `__init_subclass__`, namely, any kwargs passed to the class definition that aren't used internally by pydantic. :param \*\*kwargs: Any keyword arguments passed to the class definition that aren't used internally by pydantic. .. py:method:: __class_getitem__(typevar_values) :classmethod: .. py:method:: __copy__() Returns a shallow copy of the model. .. py:method:: __deepcopy__(memo = None) Returns a deep copy of the model. .. py:method:: __getattr__(item) .. py:method:: _check_frozen(name, value) .. py:method:: __getstate__() .. py:method:: __setstate__(state) .. py:method:: __eq__(other) .. py:method:: __init_subclass__(**kwargs) :classmethod: This signature is included purely to help type-checkers check arguments to class declaration, which provides a way to conveniently set model_config key/value pairs. ```py from pydantic import BaseModel class MyModel(BaseModel, extra='allow'): ... ``` However, this may be deceiving, since the _actual_ calls to `__init_subclass__` will not receive any of the config arguments, and will only receive any keyword arguments passed during class initialization that are _not_ expected keys in ConfigDict. (This is due to the way `ModelMetaclass.__new__` works.) :param \*\*kwargs: Keyword arguments passed to the class definition, which set model_config .. note:: You may want to override `__pydantic_init_subclass__` instead, which behaves similarly but is called *after* the class is fully initialized. .. py:method:: __iter__() So `dict(model)` works. .. py:method:: __repr__() .. py:method:: __repr_args__() .. py:attribute:: __repr_name__ .. py:attribute:: __repr_str__ .. py:attribute:: __pretty__ .. py:attribute:: __rich_repr__ .. py:method:: __str__() .. py:property:: __fields__ :type: dict[str, pydantic.fields.FieldInfo] .. py:property:: __fields_set__ :type: set[str] .. py:method:: dict(*, include = None, exclude = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False) .. py:method:: json(*, include = None, exclude = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, encoder = PydanticUndefined, models_as_dict = PydanticUndefined, **dumps_kwargs) .. py:method:: parse_obj(obj) :classmethod: .. py:method:: parse_raw(b, *, content_type = None, encoding = 'utf8', proto = None, allow_pickle = False) :classmethod: .. py:method:: parse_file(path, *, content_type = None, encoding = 'utf8', proto = None, allow_pickle = False) :classmethod: .. py:method:: from_orm(obj) :classmethod: .. py:method:: construct(_fields_set = None, **values) :classmethod: .. py:method:: copy(*, include = None, exclude = None, update = None, deep = False) Returns a copy of the model. !!! warning "Deprecated" This method is now deprecated; use `model_copy` instead. If you need `include` or `exclude`, use: ```py data = self.model_dump(include=include, exclude=exclude, round_trip=True) data = {**data, **(update or {})} copied = self.model_validate(data) ``` :param include: Optional set or mapping specifying which fields to include in the copied model. :param exclude: Optional set or mapping specifying which fields to exclude in the copied model. :param update: Optional dictionary of field-value pairs to override field values in the copied model. :param deep: If True, the values of fields that are Pydantic models will be deep-copied. :Returns: **A copy of the model with included, excluded and updated fields as specified.** .. py:method:: schema(by_alias = True, ref_template = DEFAULT_REF_TEMPLATE) :classmethod: .. py:method:: schema_json(*, by_alias = True, ref_template = DEFAULT_REF_TEMPLATE, **dumps_kwargs) :classmethod: .. py:method:: validate(value) :classmethod: .. py:method:: update_forward_refs(**localns) :classmethod: .. py:method:: _iter(*args, **kwargs) .. py:method:: _copy_and_set_values(*args, **kwargs) .. py:method:: _get_value(*args, **kwargs) :classmethod: .. py:method:: _calculate_keys(*args, **kwargs) .. py:class:: AvailableSerialisers Bases: :py:obj:`enum.Enum` Describes the available serialisers. .. py:attribute:: dill .. py:attribute:: json .. py:method:: write_to(file_path) .. py:method:: from_file(file_path) :classmethod: .. py:method:: __new__(value) .. py:method:: _generate_next_value_(start, count, last_values) Generate the next value when not given. name: the name of the member start: the initial start value or None count: the number of existing members last_value: the last value assigned or None .. py:method:: _missing_(value) :classmethod: .. py:method:: __repr__() .. py:method:: __str__() .. py:method:: __dir__() Returns all members and all public methods .. py:method:: __format__(format_spec) Returns format using actual value type unless __str__ has been overridden. .. py:method:: __hash__() .. py:method:: __reduce_ex__(proto) .. py:method:: name() The name of the Enum member. .. py:method:: value() The value of the Enum member. .. py:data:: logger .. py:class:: General(/, **data) Bases: :py:obj:`medcat.config.config.DirtiableBaseModel` The General part of the MetaCAT config .. py:attribute:: device :type: str :value: 'cpu' Device to used by the module to perform predicting/training. Reference: https://pytorch.org/docs/stable/tensor_attributes.html#torch.device .. py:attribute:: disable_component_lock :type: bool :value: False Whether to use the MetaCAT component lock. If set to False (the default), a component lock is used that forces usage only on one thread at a time. If set to True, the component lock is not used. .. py:attribute:: seed :type: int :value: 13 The seed for random number generation. NOTE: If used along RelCAT or additional NER, only one of the seeds will take effect NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: description :type: str :value: 'No description' Should provide a basic description of this MetaCAT model .. py:attribute:: category_name :type: Optional[str] :value: None What category is this meta_cat model predicting/training. NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: alternative_category_names :type: list[str] :value: [] List that stores the variations of possible category names Example: For Experiencer, the alternate name is Subject alternative_category_names: ['Experiencer','Subject'] In the case that one specified in `category_name` parameter does not match the data, this ensures no error is raised and it is automatically mapped .. py:attribute:: category_value2id :type: dict[str, int] Map from category values to ID, if empty it will be autocalculated during training .. py:attribute:: alternative_class_names :type: list[list[str]] :value: [[]] List of lists that stores the variations of possible class names for each class mentioned in self.general.category_value2id. Example: For Presence task, the class names vary across NHS sites. To accommodate for this, alternative_class_names is populated as: [ ["Hypothetical (N/A)","Hypothetical"], ["Not present (False)","False"], ["Present (True)","True"] ] Each sub list contains the possible variations of the given class. .. py:attribute:: vocab_size :type: int :value: -1 Will be set automatically if the tokenizer is provided during meta_cat init .. py:attribute:: lowercase :type: bool :value: True If true all input text will be lowercased .. py:attribute:: cntx_left :type: int :value: 15 Number of tokens to take from the left of the concept .. py:attribute:: cntx_right :type: int :value: 10 Number of tokens to take from the right of the concept .. py:attribute:: replace_center :type: Optional[Any] :value: None If set the center (concept) will be replaced with this string .. py:attribute:: batch_size_eval :type: int :value: 5000 Number of annotations to be meta-annotated at once in eval .. py:attribute:: tokenizer_name :type: str :value: 'bbpe' Tokenizer name used with MetaCAT. Choose from: - 'bbpe': Byte Pair Encoding Tokenizer - 'bert-tokenizer': BERT Tokenizer NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: save_and_reuse_tokens :type: bool :value: False This is a dangerous option, if not sure ALWAYS set to False. If set, it will try to share the pre-calculated context tokens between MetaCAT models when serving. It will ignore differences in tokenizer and context size, so you need to be sure that the models for which this is turned on have the same tokenizer and context size, during a deployment. .. py:attribute:: pipe_batch_size_in_chars :type: int :value: 20000000 How many characters are piped at once into the meta_cat class .. py:attribute:: span_group :type: Optional[str] :value: None If set, the spacy span group that the metacat model will assign annotations. Otherwise defaults to doc._.ents or doc.ents per the annotate_overlapping settings .. py:attribute:: serialiser :type: medcat.storage.serialisers.AvailableSerialisers The serialiser to use when saving. .. py:method:: get_applicable_category_name(available_names) .. py:class:: Config .. py:attribute:: extra :value: 'allow' .. py:attribute:: validate_assignment :value: True .. py:attribute:: _is_dirty :type: bool :value: False .. py:method:: __setattr__(name, value) .. py:property:: is_dirty :type: bool .. py:method:: mark_clean() .. py:method:: get_strategy() .. py:method:: get_init_attrs() :classmethod: .. py:method:: ignore_attrs() :classmethod: .. py:method:: include_properties() :classmethod: .. py:method:: merge_config(other) Merge this config with another config's (partial) model dump. The exepctation is that the `other` dict is a partial model dump. Values specified there are overwritten into the current config. Values not specified there are left intact. The `other` config can have keys/values that do not exist in the config or sub-config. And they will be added where possible. :param other: The model dump :type other: dict :raises IncorrectConfigValues: If unable to set the attribute, trying to set incorrect value, or trying to set sub-config values in an incorrect format (non-dict). .. py:method:: load(path) :classmethod: .. py:attribute:: model_config :type: ClassVar[pydantic.config.ConfigDict] Configuration for the model, should be a dictionary conforming to [`ConfigDict`][pydantic.config.ConfigDict]. .. py:attribute:: model_fields :type: ClassVar[Dict[str, pydantic.fields.FieldInfo]] Metadata about the fields defined on the model, mapping of field names to [`FieldInfo`][pydantic.fields.FieldInfo] objects. This replaces `Model.__fields__` from Pydantic V1. .. py:attribute:: model_computed_fields :type: ClassVar[Dict[str, pydantic.fields.ComputedFieldInfo]] A dictionary of computed field names and their corresponding `ComputedFieldInfo` objects. .. py:attribute:: __class_vars__ :type: ClassVar[set[str]] The names of the class variables defined on the model. .. py:attribute:: __private_attributes__ :type: ClassVar[Dict[str, pydantic.fields.ModelPrivateAttr]] Metadata about the private attributes of the model. .. py:attribute:: __signature__ :type: ClassVar[inspect.Signature] The synthesized `__init__` [`Signature`][inspect.Signature] of the model. .. py:attribute:: __pydantic_complete__ :type: ClassVar[bool] :value: False Whether model building is completed, or if there are still undefined fields. .. py:attribute:: __pydantic_core_schema__ :type: ClassVar[pydantic_core.CoreSchema] The core schema of the model. .. py:attribute:: __pydantic_custom_init__ :type: ClassVar[bool] Whether the model has a custom `__init__` method. .. py:attribute:: __pydantic_decorators__ :type: ClassVar[pydantic._internal._decorators.DecoratorInfos] Metadata containing the decorators defined on the model. This replaces `Model.__validators__` and `Model.__root_validators__` from Pydantic V1. .. py:attribute:: __pydantic_generic_metadata__ :type: ClassVar[pydantic._internal._generics.PydanticGenericMetadata] Metadata for generic models; contains data used for a similar purpose to __args__, __origin__, __parameters__ in typing-module generics. May eventually be replaced by these. .. py:attribute:: __pydantic_parent_namespace__ :type: ClassVar[Dict[str, Any] | None] :value: None Parent namespace of the model, used for automatic rebuilding of models. .. py:attribute:: __pydantic_post_init__ :type: ClassVar[None | Literal['model_post_init']] The name of the post-init method for the model, if defined. .. py:attribute:: __pydantic_root_model__ :type: ClassVar[bool] :value: False Whether the model is a [`RootModel`][pydantic.root_model.RootModel]. .. py:attribute:: __pydantic_serializer__ :type: ClassVar[pydantic_core.SchemaSerializer] The `pydantic-core` `SchemaSerializer` used to dump instances of the model. .. py:attribute:: __pydantic_validator__ :type: ClassVar[pydantic_core.SchemaValidator | pydantic.plugin._schema_validator.PluggableSchemaValidator] The `pydantic-core` `SchemaValidator` used to validate instances of the model. .. py:attribute:: __pydantic_extra__ :type: dict[str, Any] | None A dictionary containing extra values, if [`extra`][pydantic.config.ConfigDict.extra] is set to `'allow'`. .. py:attribute:: __pydantic_fields_set__ :type: set[str] The names of fields explicitly set during instantiation. .. py:attribute:: __pydantic_private__ :type: dict[str, Any] | None Values of private attributes set on the model instance. .. py:attribute:: __slots__ :value: ('__dict__', '__pydantic_fields_set__', '__pydantic_extra__', '__pydantic_private__') .. py:method:: __init__(/, **data) Create a new model by parsing and validating input data from keyword arguments. Raises [`ValidationError`][pydantic_core.ValidationError] if the input data cannot be validated to form a valid model. `self` is explicitly positional-only to allow `self` as a field name. .. py:property:: model_extra :type: dict[str, Any] | None Get extra fields set during validation. :Returns: **A dictionary of extra fields, or `None` if `config.extra` is not set to `"allow"`.** .. py:property:: model_fields_set :type: set[str] Returns the set of fields that have been explicitly set on this model instance. :Returns: **A set of strings representing the fields that have been set,** -- i.e. that were not filled from defaults. .. py:method:: model_construct(_fields_set = None, **values) :classmethod: Creates a new instance of the `Model` class with validated data. Creates a new model setting `__dict__` and `__pydantic_fields_set__` from trusted or pre-validated data. Default values are respected, but no other validation is performed. !!! note `model_construct()` generally respects the `model_config.extra` setting on the provided model. That is, if `model_config.extra == 'allow'`, then all extra passed values are added to the model instance's `__dict__` and `__pydantic_extra__` fields. If `model_config.extra == 'ignore'` (the default), then all extra passed values are ignored. Because no validation is performed with a call to `model_construct()`, having `model_config.extra == 'forbid'` does not result in an error if extra values are passed, but they will be ignored. :param _fields_set: A set of field names that were originally explicitly set during instantiation. If provided, this is directly used for the [`model_fields_set`][pydantic.BaseModel.model_fields_set] attribute. Otherwise, the field names from the `values` argument will be used. :param values: Trusted or pre-validated data dictionary. :Returns: **A new instance of the `Model` class with validated data.** .. py:method:: model_copy(*, update = None, deep = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#model_copy Returns a copy of the model. :param update: Values to change/add in the new model. Note: the data is not validated before creating the new model. You should trust this data. :param deep: Set to `True` to make a deep copy of the model. :Returns: **New model instance.** .. py:method:: model_dump(*, mode = 'python', include = None, exclude = None, context = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, round_trip = False, warnings = True, serialize_as_any = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#modelmodel_dump Generate a dictionary representation of the model, optionally specifying which fields to include or exclude. :param mode: The mode in which `to_python` should run. If mode is 'json', the output will only contain JSON serializable types. If mode is 'python', the output may contain non-JSON-serializable Python objects. :param include: A set of fields to include in the output. :param exclude: A set of fields to exclude from the output. :param context: Additional context to pass to the serializer. :param by_alias: Whether to use the field's alias in the dictionary key if defined. :param exclude_unset: Whether to exclude fields that have not been explicitly set. :param exclude_defaults: Whether to exclude fields that are set to their default value. :param exclude_none: Whether to exclude fields that have a value of `None`. :param round_trip: If True, dumped values should be valid as input for non-idempotent types such as Json[T]. :param warnings: How to handle serialization errors. False/"none" ignores them, True/"warn" logs errors, "error" raises a [`PydanticSerializationError`][pydantic_core.PydanticSerializationError]. :param serialize_as_any: Whether to serialize fields with duck-typing serialization behavior. :Returns: **A dictionary representation of the model.** .. py:method:: model_dump_json(*, indent = None, include = None, exclude = None, context = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, round_trip = False, warnings = True, serialize_as_any = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#modelmodel_dump_json Generates a JSON representation of the model using Pydantic's `to_json` method. :param indent: Indentation to use in the JSON output. If None is passed, the output will be compact. :param include: Field(s) to include in the JSON output. :param exclude: Field(s) to exclude from the JSON output. :param context: Additional context to pass to the serializer. :param by_alias: Whether to serialize using field aliases. :param exclude_unset: Whether to exclude fields that have not been explicitly set. :param exclude_defaults: Whether to exclude fields that are set to their default value. :param exclude_none: Whether to exclude fields that have a value of `None`. :param round_trip: If True, dumped values should be valid as input for non-idempotent types such as Json[T]. :param warnings: How to handle serialization errors. False/"none" ignores them, True/"warn" logs errors, "error" raises a [`PydanticSerializationError`][pydantic_core.PydanticSerializationError]. :param serialize_as_any: Whether to serialize fields with duck-typing serialization behavior. :Returns: **A JSON string representation of the model.** .. py:method:: model_json_schema(by_alias = True, ref_template = DEFAULT_REF_TEMPLATE, schema_generator = GenerateJsonSchema, mode = 'validation') :classmethod: Generates a JSON schema for a model class. :param by_alias: Whether to use attribute aliases or not. :param ref_template: The reference template. :param schema_generator: To override the logic used to generate the JSON schema, as a subclass of `GenerateJsonSchema` with your desired modifications :param mode: The mode in which to generate the schema. :Returns: **The JSON schema for the given model class.** .. py:method:: model_parametrized_name(params) :classmethod: Compute the class name for parametrizations of generic classes. This method can be overridden to achieve a custom naming scheme for generic BaseModels. :param params: Tuple of types of the class. Given a generic class `Model` with 2 type variables and a concrete model `Model[str, int]`, the value `(str, int)` would be passed to `params`. :Returns: **String representing the new class where `params` are passed to `cls` as type variables.** :raises TypeError: Raised when trying to generate concrete names for non-generic models. .. py:method:: model_post_init(__context) Override this method to perform additional initialization after `__init__` and `model_construct`. This is useful if you want to do some validation that requires the entire model to be initialized. .. py:method:: model_rebuild(*, force = False, raise_errors = True, _parent_namespace_depth = 2, _types_namespace = None) :classmethod: Try to rebuild the pydantic-core schema for the model. This may be necessary when one of the annotations is a ForwardRef which could not be resolved during the initial attempt to build the schema, and automatic rebuilding fails. :param force: Whether to force the rebuilding of the model schema, defaults to `False`. :param raise_errors: Whether to raise errors, defaults to `True`. :param _parent_namespace_depth: The depth level of the parent namespace, defaults to 2. :param _types_namespace: The types namespace, defaults to `None`. :Returns: * **Returns `None` if the schema is already "complete" and rebuilding was not required.** * **If rebuilding _was_ required, returns `True` if rebuilding was successful, otherwise `False`.** .. py:method:: model_validate(obj, *, strict = None, from_attributes = None, context = None) :classmethod: Validate a pydantic model instance. :param obj: The object to validate. :param strict: Whether to enforce types strictly. :param from_attributes: Whether to extract data from object attributes. :param context: Additional context to pass to the validator. :raises ValidationError: If the object could not be validated. :Returns: **The validated model instance.** .. py:method:: model_validate_json(json_data, *, strict = None, context = None) :classmethod: Usage docs: https://docs.pydantic.dev/2.9/concepts/json/#json-parsing Validate the given JSON data against the Pydantic model. :param json_data: The JSON data to validate. :param strict: Whether to enforce types strictly. :param context: Extra variables to pass to the validator. :Returns: **The validated Pydantic model.** :raises ValidationError: If `json_data` is not a JSON string or the object could not be validated. .. py:method:: model_validate_strings(obj, *, strict = None, context = None) :classmethod: Validate the given object with string data against the Pydantic model. :param obj: The object containing string data to validate. :param strict: Whether to enforce types strictly. :param context: Extra variables to pass to the validator. :Returns: **The validated Pydantic model.** .. py:method:: __get_pydantic_core_schema__(source, handler, /) :classmethod: Hook into generating the model's CoreSchema. :param source: The class we are generating a schema for. This will generally be the same as the `cls` argument if this is a classmethod. :param handler: A callable that calls into Pydantic's internal CoreSchema generation logic. :Returns: **A `pydantic-core` `CoreSchema`.** .. py:method:: __get_pydantic_json_schema__(core_schema, handler, /) :classmethod: Hook into generating the model's JSON schema. :param core_schema: A `pydantic-core` CoreSchema. You can ignore this argument and call the handler with a new CoreSchema, wrap this CoreSchema (`{'type': 'nullable', 'schema': current_schema}`), or just call the handler with the original schema. :param handler: Call into Pydantic's internal JSON schema generation. This will raise a `pydantic.errors.PydanticInvalidForJsonSchema` if JSON schema generation fails. Since this gets called by `BaseModel.model_json_schema` you can override the `schema_generator` argument to that function to change JSON schema generation globally for a type. :Returns: **A JSON schema, as a Python object.** .. py:method:: __pydantic_init_subclass__(**kwargs) :classmethod: This is intended to behave just like `__init_subclass__`, but is called by `ModelMetaclass` only after the class is actually fully initialized. In particular, attributes like `model_fields` will be present when this is called. This is necessary because `__init_subclass__` will always be called by `type.__new__`, and it would require a prohibitively large refactor to the `ModelMetaclass` to ensure that `type.__new__` was called in such a manner that the class would already be sufficiently initialized. This will receive the same `kwargs` that would be passed to the standard `__init_subclass__`, namely, any kwargs passed to the class definition that aren't used internally by pydantic. :param \*\*kwargs: Any keyword arguments passed to the class definition that aren't used internally by pydantic. .. py:method:: __class_getitem__(typevar_values) :classmethod: .. py:method:: __copy__() Returns a shallow copy of the model. .. py:method:: __deepcopy__(memo = None) Returns a deep copy of the model. .. py:method:: __getattr__(item) .. py:method:: _check_frozen(name, value) .. py:method:: __getstate__() .. py:method:: __setstate__(state) .. py:method:: __eq__(other) .. py:method:: __init_subclass__(**kwargs) :classmethod: This signature is included purely to help type-checkers check arguments to class declaration, which provides a way to conveniently set model_config key/value pairs. ```py from pydantic import BaseModel class MyModel(BaseModel, extra='allow'): ... ``` However, this may be deceiving, since the _actual_ calls to `__init_subclass__` will not receive any of the config arguments, and will only receive any keyword arguments passed during class initialization that are _not_ expected keys in ConfigDict. (This is due to the way `ModelMetaclass.__new__` works.) :param \*\*kwargs: Keyword arguments passed to the class definition, which set model_config .. note:: You may want to override `__pydantic_init_subclass__` instead, which behaves similarly but is called *after* the class is fully initialized. .. py:method:: __iter__() So `dict(model)` works. .. py:method:: __repr__() .. py:method:: __repr_args__() .. py:attribute:: __repr_name__ .. py:attribute:: __repr_str__ .. py:attribute:: __pretty__ .. py:attribute:: __rich_repr__ .. py:method:: __str__() .. py:property:: __fields__ :type: dict[str, pydantic.fields.FieldInfo] .. py:property:: __fields_set__ :type: set[str] .. py:method:: dict(*, include = None, exclude = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False) .. py:method:: json(*, include = None, exclude = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, encoder = PydanticUndefined, models_as_dict = PydanticUndefined, **dumps_kwargs) .. py:method:: parse_obj(obj) :classmethod: .. py:method:: parse_raw(b, *, content_type = None, encoding = 'utf8', proto = None, allow_pickle = False) :classmethod: .. py:method:: parse_file(path, *, content_type = None, encoding = 'utf8', proto = None, allow_pickle = False) :classmethod: .. py:method:: from_orm(obj) :classmethod: .. py:method:: construct(_fields_set = None, **values) :classmethod: .. py:method:: copy(*, include = None, exclude = None, update = None, deep = False) Returns a copy of the model. !!! warning "Deprecated" This method is now deprecated; use `model_copy` instead. If you need `include` or `exclude`, use: ```py data = self.model_dump(include=include, exclude=exclude, round_trip=True) data = {**data, **(update or {})} copied = self.model_validate(data) ``` :param include: Optional set or mapping specifying which fields to include in the copied model. :param exclude: Optional set or mapping specifying which fields to exclude in the copied model. :param update: Optional dictionary of field-value pairs to override field values in the copied model. :param deep: If True, the values of fields that are Pydantic models will be deep-copied. :Returns: **A copy of the model with included, excluded and updated fields as specified.** .. py:method:: schema(by_alias = True, ref_template = DEFAULT_REF_TEMPLATE) :classmethod: .. py:method:: schema_json(*, by_alias = True, ref_template = DEFAULT_REF_TEMPLATE, **dumps_kwargs) :classmethod: .. py:method:: validate(value) :classmethod: .. py:method:: update_forward_refs(**localns) :classmethod: .. py:method:: _iter(*args, **kwargs) .. py:method:: _copy_and_set_values(*args, **kwargs) .. py:method:: _get_value(*args, **kwargs) :classmethod: .. py:method:: _calculate_keys(*args, **kwargs) .. py:class:: Model(/, **data) Bases: :py:obj:`medcat.config.config.DirtiableBaseModel` The model part of the metaCAT config .. py:attribute:: model_name :type: str :value: 'lstm' Model to be used for training or predicting. Choose from: - 'bert' - 'lstm' .. note:: When changing the model, make sure to change the tokenizer accordingly. NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: model_variant :type: str :value: 'bert-base-uncased' Applicable only when using BERT: Specifies the model variant to be used. NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: model_freeze_layers :type: bool :value: True Applicable only when using BERT: Determines the training approach for BERT. - If True: BERT layers are frozen and only the fully connected (FC) layer(s) on top are trained. - If False: Parameter-efficient fine-tuning will be applied using Low-Rank Adaptation (LoRA). NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: num_layers :type: int :value: 2 Number of layers in the model (both LSTM and BERT) NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: input_size :type: int :value: 300 Specifies the size of the embedding layer. Applicable only for LSTM model and ignored for BERT as BERT's embedding size is predefined. NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: hidden_size :type: int :value: 300 Number of neurons in the hidden layer. NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: dropout :type: float :value: 0.5 The dropout for the model. NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: phase_number :type: int :value: 0 Indicates whether two phase learning is to be used for training. 1: Phase 1 - Train model on undersampled data 2: Phase 2 - Continue training on full data 0: None - 2 phase learning is not performed Paper reference - https://ieeexplore.ieee.org/document/7533053 .. py:attribute:: category_undersample :type: str :value: '' When using 2 phase learning, this category is used to undersample the data .. py:attribute:: model_architecture_config :type: dict[str, bool] Specifies the architecture for BERT model. If fc2 is set to True, then the 2nd fully connected layer is used If fc2 is True and fc3 is set to True, then the 3rd fully connected layer is used If lr_scheduler is set to True, then the learning rate scheduler is used with the optimizer NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: num_directions :type: int :value: 2 Applicable only for LSTM: 2 - bidirectional model, 1 - unidirectional NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: nclasses :type: int :value: 2 Number of classes that this model will output. NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: padding_idx :type: int :value: -1 The padding index. NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: emb_grad :type: bool :value: True Applicable only for LSTM: If True, the embeddings will also be trained. NB! For these changes to take effect, the pipe would need to be recreated. .. py:attribute:: ignore_cpos :type: bool :value: False If set to True center positions will be ignored when calculating representation .. py:class:: Config .. py:attribute:: extra :value: 'allow' .. py:attribute:: validate_assignment :value: True .. py:attribute:: protected_namespaces :value: () .. py:attribute:: _is_dirty :type: bool :value: False .. py:method:: __setattr__(name, value) .. py:property:: is_dirty :type: bool .. py:method:: mark_clean() .. py:method:: get_strategy() .. py:method:: get_init_attrs() :classmethod: .. py:method:: ignore_attrs() :classmethod: .. py:method:: include_properties() :classmethod: .. py:method:: merge_config(other) Merge this config with another config's (partial) model dump. The exepctation is that the `other` dict is a partial model dump. Values specified there are overwritten into the current config. Values not specified there are left intact. The `other` config can have keys/values that do not exist in the config or sub-config. And they will be added where possible. :param other: The model dump :type other: dict :raises IncorrectConfigValues: If unable to set the attribute, trying to set incorrect value, or trying to set sub-config values in an incorrect format (non-dict). .. py:method:: load(path) :classmethod: .. py:attribute:: model_config :type: ClassVar[pydantic.config.ConfigDict] Configuration for the model, should be a dictionary conforming to [`ConfigDict`][pydantic.config.ConfigDict]. .. py:attribute:: model_fields :type: ClassVar[Dict[str, pydantic.fields.FieldInfo]] Metadata about the fields defined on the model, mapping of field names to [`FieldInfo`][pydantic.fields.FieldInfo] objects. This replaces `Model.__fields__` from Pydantic V1. .. py:attribute:: model_computed_fields :type: ClassVar[Dict[str, pydantic.fields.ComputedFieldInfo]] A dictionary of computed field names and their corresponding `ComputedFieldInfo` objects. .. py:attribute:: __class_vars__ :type: ClassVar[set[str]] The names of the class variables defined on the model. .. py:attribute:: __private_attributes__ :type: ClassVar[Dict[str, pydantic.fields.ModelPrivateAttr]] Metadata about the private attributes of the model. .. py:attribute:: __signature__ :type: ClassVar[inspect.Signature] The synthesized `__init__` [`Signature`][inspect.Signature] of the model. .. py:attribute:: __pydantic_complete__ :type: ClassVar[bool] :value: False Whether model building is completed, or if there are still undefined fields. .. py:attribute:: __pydantic_core_schema__ :type: ClassVar[pydantic_core.CoreSchema] The core schema of the model. .. py:attribute:: __pydantic_custom_init__ :type: ClassVar[bool] Whether the model has a custom `__init__` method. .. py:attribute:: __pydantic_decorators__ :type: ClassVar[pydantic._internal._decorators.DecoratorInfos] Metadata containing the decorators defined on the model. This replaces `Model.__validators__` and `Model.__root_validators__` from Pydantic V1. .. py:attribute:: __pydantic_generic_metadata__ :type: ClassVar[pydantic._internal._generics.PydanticGenericMetadata] Metadata for generic models; contains data used for a similar purpose to __args__, __origin__, __parameters__ in typing-module generics. May eventually be replaced by these. .. py:attribute:: __pydantic_parent_namespace__ :type: ClassVar[Dict[str, Any] | None] :value: None Parent namespace of the model, used for automatic rebuilding of models. .. py:attribute:: __pydantic_post_init__ :type: ClassVar[None | Literal['model_post_init']] The name of the post-init method for the model, if defined. .. py:attribute:: __pydantic_root_model__ :type: ClassVar[bool] :value: False Whether the model is a [`RootModel`][pydantic.root_model.RootModel]. .. py:attribute:: __pydantic_serializer__ :type: ClassVar[pydantic_core.SchemaSerializer] The `pydantic-core` `SchemaSerializer` used to dump instances of the model. .. py:attribute:: __pydantic_validator__ :type: ClassVar[pydantic_core.SchemaValidator | pydantic.plugin._schema_validator.PluggableSchemaValidator] The `pydantic-core` `SchemaValidator` used to validate instances of the model. .. py:attribute:: __pydantic_extra__ :type: dict[str, Any] | None A dictionary containing extra values, if [`extra`][pydantic.config.ConfigDict.extra] is set to `'allow'`. .. py:attribute:: __pydantic_fields_set__ :type: set[str] The names of fields explicitly set during instantiation. .. py:attribute:: __pydantic_private__ :type: dict[str, Any] | None Values of private attributes set on the model instance. .. py:attribute:: __slots__ :value: ('__dict__', '__pydantic_fields_set__', '__pydantic_extra__', '__pydantic_private__') .. py:method:: __init__(/, **data) Create a new model by parsing and validating input data from keyword arguments. Raises [`ValidationError`][pydantic_core.ValidationError] if the input data cannot be validated to form a valid model. `self` is explicitly positional-only to allow `self` as a field name. .. py:property:: model_extra :type: dict[str, Any] | None Get extra fields set during validation. :Returns: **A dictionary of extra fields, or `None` if `config.extra` is not set to `"allow"`.** .. py:property:: model_fields_set :type: set[str] Returns the set of fields that have been explicitly set on this model instance. :Returns: **A set of strings representing the fields that have been set,** -- i.e. that were not filled from defaults. .. py:method:: model_construct(_fields_set = None, **values) :classmethod: Creates a new instance of the `Model` class with validated data. Creates a new model setting `__dict__` and `__pydantic_fields_set__` from trusted or pre-validated data. Default values are respected, but no other validation is performed. !!! note `model_construct()` generally respects the `model_config.extra` setting on the provided model. That is, if `model_config.extra == 'allow'`, then all extra passed values are added to the model instance's `__dict__` and `__pydantic_extra__` fields. If `model_config.extra == 'ignore'` (the default), then all extra passed values are ignored. Because no validation is performed with a call to `model_construct()`, having `model_config.extra == 'forbid'` does not result in an error if extra values are passed, but they will be ignored. :param _fields_set: A set of field names that were originally explicitly set during instantiation. If provided, this is directly used for the [`model_fields_set`][pydantic.BaseModel.model_fields_set] attribute. Otherwise, the field names from the `values` argument will be used. :param values: Trusted or pre-validated data dictionary. :Returns: **A new instance of the `Model` class with validated data.** .. py:method:: model_copy(*, update = None, deep = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#model_copy Returns a copy of the model. :param update: Values to change/add in the new model. Note: the data is not validated before creating the new model. You should trust this data. :param deep: Set to `True` to make a deep copy of the model. :Returns: **New model instance.** .. py:method:: model_dump(*, mode = 'python', include = None, exclude = None, context = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, round_trip = False, warnings = True, serialize_as_any = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#modelmodel_dump Generate a dictionary representation of the model, optionally specifying which fields to include or exclude. :param mode: The mode in which `to_python` should run. If mode is 'json', the output will only contain JSON serializable types. If mode is 'python', the output may contain non-JSON-serializable Python objects. :param include: A set of fields to include in the output. :param exclude: A set of fields to exclude from the output. :param context: Additional context to pass to the serializer. :param by_alias: Whether to use the field's alias in the dictionary key if defined. :param exclude_unset: Whether to exclude fields that have not been explicitly set. :param exclude_defaults: Whether to exclude fields that are set to their default value. :param exclude_none: Whether to exclude fields that have a value of `None`. :param round_trip: If True, dumped values should be valid as input for non-idempotent types such as Json[T]. :param warnings: How to handle serialization errors. False/"none" ignores them, True/"warn" logs errors, "error" raises a [`PydanticSerializationError`][pydantic_core.PydanticSerializationError]. :param serialize_as_any: Whether to serialize fields with duck-typing serialization behavior. :Returns: **A dictionary representation of the model.** .. py:method:: model_dump_json(*, indent = None, include = None, exclude = None, context = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, round_trip = False, warnings = True, serialize_as_any = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#modelmodel_dump_json Generates a JSON representation of the model using Pydantic's `to_json` method. :param indent: Indentation to use in the JSON output. If None is passed, the output will be compact. :param include: Field(s) to include in the JSON output. :param exclude: Field(s) to exclude from the JSON output. :param context: Additional context to pass to the serializer. :param by_alias: Whether to serialize using field aliases. :param exclude_unset: Whether to exclude fields that have not been explicitly set. :param exclude_defaults: Whether to exclude fields that are set to their default value. :param exclude_none: Whether to exclude fields that have a value of `None`. :param round_trip: If True, dumped values should be valid as input for non-idempotent types such as Json[T]. :param warnings: How to handle serialization errors. False/"none" ignores them, True/"warn" logs errors, "error" raises a [`PydanticSerializationError`][pydantic_core.PydanticSerializationError]. :param serialize_as_any: Whether to serialize fields with duck-typing serialization behavior. :Returns: **A JSON string representation of the model.** .. py:method:: model_json_schema(by_alias = True, ref_template = DEFAULT_REF_TEMPLATE, schema_generator = GenerateJsonSchema, mode = 'validation') :classmethod: Generates a JSON schema for a model class. :param by_alias: Whether to use attribute aliases or not. :param ref_template: The reference template. :param schema_generator: To override the logic used to generate the JSON schema, as a subclass of `GenerateJsonSchema` with your desired modifications :param mode: The mode in which to generate the schema. :Returns: **The JSON schema for the given model class.** .. py:method:: model_parametrized_name(params) :classmethod: Compute the class name for parametrizations of generic classes. This method can be overridden to achieve a custom naming scheme for generic BaseModels. :param params: Tuple of types of the class. Given a generic class `Model` with 2 type variables and a concrete model `Model[str, int]`, the value `(str, int)` would be passed to `params`. :Returns: **String representing the new class where `params` are passed to `cls` as type variables.** :raises TypeError: Raised when trying to generate concrete names for non-generic models. .. py:method:: model_post_init(__context) Override this method to perform additional initialization after `__init__` and `model_construct`. This is useful if you want to do some validation that requires the entire model to be initialized. .. py:method:: model_rebuild(*, force = False, raise_errors = True, _parent_namespace_depth = 2, _types_namespace = None) :classmethod: Try to rebuild the pydantic-core schema for the model. This may be necessary when one of the annotations is a ForwardRef which could not be resolved during the initial attempt to build the schema, and automatic rebuilding fails. :param force: Whether to force the rebuilding of the model schema, defaults to `False`. :param raise_errors: Whether to raise errors, defaults to `True`. :param _parent_namespace_depth: The depth level of the parent namespace, defaults to 2. :param _types_namespace: The types namespace, defaults to `None`. :Returns: * **Returns `None` if the schema is already "complete" and rebuilding was not required.** * **If rebuilding _was_ required, returns `True` if rebuilding was successful, otherwise `False`.** .. py:method:: model_validate(obj, *, strict = None, from_attributes = None, context = None) :classmethod: Validate a pydantic model instance. :param obj: The object to validate. :param strict: Whether to enforce types strictly. :param from_attributes: Whether to extract data from object attributes. :param context: Additional context to pass to the validator. :raises ValidationError: If the object could not be validated. :Returns: **The validated model instance.** .. py:method:: model_validate_json(json_data, *, strict = None, context = None) :classmethod: Usage docs: https://docs.pydantic.dev/2.9/concepts/json/#json-parsing Validate the given JSON data against the Pydantic model. :param json_data: The JSON data to validate. :param strict: Whether to enforce types strictly. :param context: Extra variables to pass to the validator. :Returns: **The validated Pydantic model.** :raises ValidationError: If `json_data` is not a JSON string or the object could not be validated. .. py:method:: model_validate_strings(obj, *, strict = None, context = None) :classmethod: Validate the given object with string data against the Pydantic model. :param obj: The object containing string data to validate. :param strict: Whether to enforce types strictly. :param context: Extra variables to pass to the validator. :Returns: **The validated Pydantic model.** .. py:method:: __get_pydantic_core_schema__(source, handler, /) :classmethod: Hook into generating the model's CoreSchema. :param source: The class we are generating a schema for. This will generally be the same as the `cls` argument if this is a classmethod. :param handler: A callable that calls into Pydantic's internal CoreSchema generation logic. :Returns: **A `pydantic-core` `CoreSchema`.** .. py:method:: __get_pydantic_json_schema__(core_schema, handler, /) :classmethod: Hook into generating the model's JSON schema. :param core_schema: A `pydantic-core` CoreSchema. You can ignore this argument and call the handler with a new CoreSchema, wrap this CoreSchema (`{'type': 'nullable', 'schema': current_schema}`), or just call the handler with the original schema. :param handler: Call into Pydantic's internal JSON schema generation. This will raise a `pydantic.errors.PydanticInvalidForJsonSchema` if JSON schema generation fails. Since this gets called by `BaseModel.model_json_schema` you can override the `schema_generator` argument to that function to change JSON schema generation globally for a type. :Returns: **A JSON schema, as a Python object.** .. py:method:: __pydantic_init_subclass__(**kwargs) :classmethod: This is intended to behave just like `__init_subclass__`, but is called by `ModelMetaclass` only after the class is actually fully initialized. In particular, attributes like `model_fields` will be present when this is called. This is necessary because `__init_subclass__` will always be called by `type.__new__`, and it would require a prohibitively large refactor to the `ModelMetaclass` to ensure that `type.__new__` was called in such a manner that the class would already be sufficiently initialized. This will receive the same `kwargs` that would be passed to the standard `__init_subclass__`, namely, any kwargs passed to the class definition that aren't used internally by pydantic. :param \*\*kwargs: Any keyword arguments passed to the class definition that aren't used internally by pydantic. .. py:method:: __class_getitem__(typevar_values) :classmethod: .. py:method:: __copy__() Returns a shallow copy of the model. .. py:method:: __deepcopy__(memo = None) Returns a deep copy of the model. .. py:method:: __getattr__(item) .. py:method:: _check_frozen(name, value) .. py:method:: __getstate__() .. py:method:: __setstate__(state) .. py:method:: __eq__(other) .. py:method:: __init_subclass__(**kwargs) :classmethod: This signature is included purely to help type-checkers check arguments to class declaration, which provides a way to conveniently set model_config key/value pairs. ```py from pydantic import BaseModel class MyModel(BaseModel, extra='allow'): ... ``` However, this may be deceiving, since the _actual_ calls to `__init_subclass__` will not receive any of the config arguments, and will only receive any keyword arguments passed during class initialization that are _not_ expected keys in ConfigDict. (This is due to the way `ModelMetaclass.__new__` works.) :param \*\*kwargs: Keyword arguments passed to the class definition, which set model_config .. note:: You may want to override `__pydantic_init_subclass__` instead, which behaves similarly but is called *after* the class is fully initialized. .. py:method:: __iter__() So `dict(model)` works. .. py:method:: __repr__() .. py:method:: __repr_args__() .. py:attribute:: __repr_name__ .. py:attribute:: __repr_str__ .. py:attribute:: __pretty__ .. py:attribute:: __rich_repr__ .. py:method:: __str__() .. py:property:: __fields__ :type: dict[str, pydantic.fields.FieldInfo] .. py:property:: __fields_set__ :type: set[str] .. py:method:: dict(*, include = None, exclude = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False) .. py:method:: json(*, include = None, exclude = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, encoder = PydanticUndefined, models_as_dict = PydanticUndefined, **dumps_kwargs) .. py:method:: parse_obj(obj) :classmethod: .. py:method:: parse_raw(b, *, content_type = None, encoding = 'utf8', proto = None, allow_pickle = False) :classmethod: .. py:method:: parse_file(path, *, content_type = None, encoding = 'utf8', proto = None, allow_pickle = False) :classmethod: .. py:method:: from_orm(obj) :classmethod: .. py:method:: construct(_fields_set = None, **values) :classmethod: .. py:method:: copy(*, include = None, exclude = None, update = None, deep = False) Returns a copy of the model. !!! warning "Deprecated" This method is now deprecated; use `model_copy` instead. If you need `include` or `exclude`, use: ```py data = self.model_dump(include=include, exclude=exclude, round_trip=True) data = {**data, **(update or {})} copied = self.model_validate(data) ``` :param include: Optional set or mapping specifying which fields to include in the copied model. :param exclude: Optional set or mapping specifying which fields to exclude in the copied model. :param update: Optional dictionary of field-value pairs to override field values in the copied model. :param deep: If True, the values of fields that are Pydantic models will be deep-copied. :Returns: **A copy of the model with included, excluded and updated fields as specified.** .. py:method:: schema(by_alias = True, ref_template = DEFAULT_REF_TEMPLATE) :classmethod: .. py:method:: schema_json(*, by_alias = True, ref_template = DEFAULT_REF_TEMPLATE, **dumps_kwargs) :classmethod: .. py:method:: validate(value) :classmethod: .. py:method:: update_forward_refs(**localns) :classmethod: .. py:method:: _iter(*args, **kwargs) .. py:method:: _copy_and_set_values(*args, **kwargs) .. py:method:: _get_value(*args, **kwargs) :classmethod: .. py:method:: _calculate_keys(*args, **kwargs) .. py:class:: Train(/, **data) Bases: :py:obj:`medcat.config.config.DirtiableBaseModel` The train part of the metaCAT config .. py:attribute:: batch_size :type: int :value: 100 .. py:attribute:: nepochs :type: int :value: 50 .. py:attribute:: lr :type: float :value: 0.001 .. py:attribute:: test_size :type: float :value: 0.1 .. py:attribute:: shuffle_data :type: bool :value: True Used only during training, if set the dataset will be shuffled before train/test split .. py:attribute:: class_weights :type: Optional[Any] :value: None .. py:attribute:: compute_class_weights :type: bool :value: False If true and class weights not provided, the class weights will be calculated based on the data .. py:attribute:: score_average :type: str :value: 'weighted' What to use for averaging F1/P/R across labels .. py:attribute:: prerequisites :type: dict .. py:attribute:: cui_filter :type: Optional[Any] :value: None If set only this CUIs will be used for training .. py:attribute:: auto_save_model :type: bool :value: True Should do model be saved during training for best results .. py:attribute:: last_train_on :type: Optional[float] :value: None When was the last training run .. py:attribute:: metric :type: dict[str, str] What metric should be used for choosing the best model .. py:attribute:: loss_funct :type: str :value: 'cross_entropy' Loss function for the model. Choose from: - 'cross_entropy' - 'focal_loss' .. py:attribute:: gamma :type: int :value: 2 Focal Loss hyperparameter - determines importance the loss gives to hard-to-classify examples .. py:class:: Config .. py:attribute:: extra :value: 'allow' .. py:attribute:: validate_assignment :value: True .. py:attribute:: _is_dirty :type: bool :value: False .. py:method:: __setattr__(name, value) .. py:property:: is_dirty :type: bool .. py:method:: mark_clean() .. py:method:: get_strategy() .. py:method:: get_init_attrs() :classmethod: .. py:method:: ignore_attrs() :classmethod: .. py:method:: include_properties() :classmethod: .. py:method:: merge_config(other) Merge this config with another config's (partial) model dump. The exepctation is that the `other` dict is a partial model dump. Values specified there are overwritten into the current config. Values not specified there are left intact. The `other` config can have keys/values that do not exist in the config or sub-config. And they will be added where possible. :param other: The model dump :type other: dict :raises IncorrectConfigValues: If unable to set the attribute, trying to set incorrect value, or trying to set sub-config values in an incorrect format (non-dict). .. py:method:: load(path) :classmethod: .. py:attribute:: model_config :type: ClassVar[pydantic.config.ConfigDict] Configuration for the model, should be a dictionary conforming to [`ConfigDict`][pydantic.config.ConfigDict]. .. py:attribute:: model_fields :type: ClassVar[Dict[str, pydantic.fields.FieldInfo]] Metadata about the fields defined on the model, mapping of field names to [`FieldInfo`][pydantic.fields.FieldInfo] objects. This replaces `Model.__fields__` from Pydantic V1. .. py:attribute:: model_computed_fields :type: ClassVar[Dict[str, pydantic.fields.ComputedFieldInfo]] A dictionary of computed field names and their corresponding `ComputedFieldInfo` objects. .. py:attribute:: __class_vars__ :type: ClassVar[set[str]] The names of the class variables defined on the model. .. py:attribute:: __private_attributes__ :type: ClassVar[Dict[str, pydantic.fields.ModelPrivateAttr]] Metadata about the private attributes of the model. .. py:attribute:: __signature__ :type: ClassVar[inspect.Signature] The synthesized `__init__` [`Signature`][inspect.Signature] of the model. .. py:attribute:: __pydantic_complete__ :type: ClassVar[bool] :value: False Whether model building is completed, or if there are still undefined fields. .. py:attribute:: __pydantic_core_schema__ :type: ClassVar[pydantic_core.CoreSchema] The core schema of the model. .. py:attribute:: __pydantic_custom_init__ :type: ClassVar[bool] Whether the model has a custom `__init__` method. .. py:attribute:: __pydantic_decorators__ :type: ClassVar[pydantic._internal._decorators.DecoratorInfos] Metadata containing the decorators defined on the model. This replaces `Model.__validators__` and `Model.__root_validators__` from Pydantic V1. .. py:attribute:: __pydantic_generic_metadata__ :type: ClassVar[pydantic._internal._generics.PydanticGenericMetadata] Metadata for generic models; contains data used for a similar purpose to __args__, __origin__, __parameters__ in typing-module generics. May eventually be replaced by these. .. py:attribute:: __pydantic_parent_namespace__ :type: ClassVar[Dict[str, Any] | None] :value: None Parent namespace of the model, used for automatic rebuilding of models. .. py:attribute:: __pydantic_post_init__ :type: ClassVar[None | Literal['model_post_init']] The name of the post-init method for the model, if defined. .. py:attribute:: __pydantic_root_model__ :type: ClassVar[bool] :value: False Whether the model is a [`RootModel`][pydantic.root_model.RootModel]. .. py:attribute:: __pydantic_serializer__ :type: ClassVar[pydantic_core.SchemaSerializer] The `pydantic-core` `SchemaSerializer` used to dump instances of the model. .. py:attribute:: __pydantic_validator__ :type: ClassVar[pydantic_core.SchemaValidator | pydantic.plugin._schema_validator.PluggableSchemaValidator] The `pydantic-core` `SchemaValidator` used to validate instances of the model. .. py:attribute:: __pydantic_extra__ :type: dict[str, Any] | None A dictionary containing extra values, if [`extra`][pydantic.config.ConfigDict.extra] is set to `'allow'`. .. py:attribute:: __pydantic_fields_set__ :type: set[str] The names of fields explicitly set during instantiation. .. py:attribute:: __pydantic_private__ :type: dict[str, Any] | None Values of private attributes set on the model instance. .. py:attribute:: __slots__ :value: ('__dict__', '__pydantic_fields_set__', '__pydantic_extra__', '__pydantic_private__') .. py:method:: __init__(/, **data) Create a new model by parsing and validating input data from keyword arguments. Raises [`ValidationError`][pydantic_core.ValidationError] if the input data cannot be validated to form a valid model. `self` is explicitly positional-only to allow `self` as a field name. .. py:property:: model_extra :type: dict[str, Any] | None Get extra fields set during validation. :Returns: **A dictionary of extra fields, or `None` if `config.extra` is not set to `"allow"`.** .. py:property:: model_fields_set :type: set[str] Returns the set of fields that have been explicitly set on this model instance. :Returns: **A set of strings representing the fields that have been set,** -- i.e. that were not filled from defaults. .. py:method:: model_construct(_fields_set = None, **values) :classmethod: Creates a new instance of the `Model` class with validated data. Creates a new model setting `__dict__` and `__pydantic_fields_set__` from trusted or pre-validated data. Default values are respected, but no other validation is performed. !!! note `model_construct()` generally respects the `model_config.extra` setting on the provided model. That is, if `model_config.extra == 'allow'`, then all extra passed values are added to the model instance's `__dict__` and `__pydantic_extra__` fields. If `model_config.extra == 'ignore'` (the default), then all extra passed values are ignored. Because no validation is performed with a call to `model_construct()`, having `model_config.extra == 'forbid'` does not result in an error if extra values are passed, but they will be ignored. :param _fields_set: A set of field names that were originally explicitly set during instantiation. If provided, this is directly used for the [`model_fields_set`][pydantic.BaseModel.model_fields_set] attribute. Otherwise, the field names from the `values` argument will be used. :param values: Trusted or pre-validated data dictionary. :Returns: **A new instance of the `Model` class with validated data.** .. py:method:: model_copy(*, update = None, deep = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#model_copy Returns a copy of the model. :param update: Values to change/add in the new model. Note: the data is not validated before creating the new model. You should trust this data. :param deep: Set to `True` to make a deep copy of the model. :Returns: **New model instance.** .. py:method:: model_dump(*, mode = 'python', include = None, exclude = None, context = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, round_trip = False, warnings = True, serialize_as_any = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#modelmodel_dump Generate a dictionary representation of the model, optionally specifying which fields to include or exclude. :param mode: The mode in which `to_python` should run. If mode is 'json', the output will only contain JSON serializable types. If mode is 'python', the output may contain non-JSON-serializable Python objects. :param include: A set of fields to include in the output. :param exclude: A set of fields to exclude from the output. :param context: Additional context to pass to the serializer. :param by_alias: Whether to use the field's alias in the dictionary key if defined. :param exclude_unset: Whether to exclude fields that have not been explicitly set. :param exclude_defaults: Whether to exclude fields that are set to their default value. :param exclude_none: Whether to exclude fields that have a value of `None`. :param round_trip: If True, dumped values should be valid as input for non-idempotent types such as Json[T]. :param warnings: How to handle serialization errors. False/"none" ignores them, True/"warn" logs errors, "error" raises a [`PydanticSerializationError`][pydantic_core.PydanticSerializationError]. :param serialize_as_any: Whether to serialize fields with duck-typing serialization behavior. :Returns: **A dictionary representation of the model.** .. py:method:: model_dump_json(*, indent = None, include = None, exclude = None, context = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, round_trip = False, warnings = True, serialize_as_any = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#modelmodel_dump_json Generates a JSON representation of the model using Pydantic's `to_json` method. :param indent: Indentation to use in the JSON output. If None is passed, the output will be compact. :param include: Field(s) to include in the JSON output. :param exclude: Field(s) to exclude from the JSON output. :param context: Additional context to pass to the serializer. :param by_alias: Whether to serialize using field aliases. :param exclude_unset: Whether to exclude fields that have not been explicitly set. :param exclude_defaults: Whether to exclude fields that are set to their default value. :param exclude_none: Whether to exclude fields that have a value of `None`. :param round_trip: If True, dumped values should be valid as input for non-idempotent types such as Json[T]. :param warnings: How to handle serialization errors. False/"none" ignores them, True/"warn" logs errors, "error" raises a [`PydanticSerializationError`][pydantic_core.PydanticSerializationError]. :param serialize_as_any: Whether to serialize fields with duck-typing serialization behavior. :Returns: **A JSON string representation of the model.** .. py:method:: model_json_schema(by_alias = True, ref_template = DEFAULT_REF_TEMPLATE, schema_generator = GenerateJsonSchema, mode = 'validation') :classmethod: Generates a JSON schema for a model class. :param by_alias: Whether to use attribute aliases or not. :param ref_template: The reference template. :param schema_generator: To override the logic used to generate the JSON schema, as a subclass of `GenerateJsonSchema` with your desired modifications :param mode: The mode in which to generate the schema. :Returns: **The JSON schema for the given model class.** .. py:method:: model_parametrized_name(params) :classmethod: Compute the class name for parametrizations of generic classes. This method can be overridden to achieve a custom naming scheme for generic BaseModels. :param params: Tuple of types of the class. Given a generic class `Model` with 2 type variables and a concrete model `Model[str, int]`, the value `(str, int)` would be passed to `params`. :Returns: **String representing the new class where `params` are passed to `cls` as type variables.** :raises TypeError: Raised when trying to generate concrete names for non-generic models. .. py:method:: model_post_init(__context) Override this method to perform additional initialization after `__init__` and `model_construct`. This is useful if you want to do some validation that requires the entire model to be initialized. .. py:method:: model_rebuild(*, force = False, raise_errors = True, _parent_namespace_depth = 2, _types_namespace = None) :classmethod: Try to rebuild the pydantic-core schema for the model. This may be necessary when one of the annotations is a ForwardRef which could not be resolved during the initial attempt to build the schema, and automatic rebuilding fails. :param force: Whether to force the rebuilding of the model schema, defaults to `False`. :param raise_errors: Whether to raise errors, defaults to `True`. :param _parent_namespace_depth: The depth level of the parent namespace, defaults to 2. :param _types_namespace: The types namespace, defaults to `None`. :Returns: * **Returns `None` if the schema is already "complete" and rebuilding was not required.** * **If rebuilding _was_ required, returns `True` if rebuilding was successful, otherwise `False`.** .. py:method:: model_validate(obj, *, strict = None, from_attributes = None, context = None) :classmethod: Validate a pydantic model instance. :param obj: The object to validate. :param strict: Whether to enforce types strictly. :param from_attributes: Whether to extract data from object attributes. :param context: Additional context to pass to the validator. :raises ValidationError: If the object could not be validated. :Returns: **The validated model instance.** .. py:method:: model_validate_json(json_data, *, strict = None, context = None) :classmethod: Usage docs: https://docs.pydantic.dev/2.9/concepts/json/#json-parsing Validate the given JSON data against the Pydantic model. :param json_data: The JSON data to validate. :param strict: Whether to enforce types strictly. :param context: Extra variables to pass to the validator. :Returns: **The validated Pydantic model.** :raises ValidationError: If `json_data` is not a JSON string or the object could not be validated. .. py:method:: model_validate_strings(obj, *, strict = None, context = None) :classmethod: Validate the given object with string data against the Pydantic model. :param obj: The object containing string data to validate. :param strict: Whether to enforce types strictly. :param context: Extra variables to pass to the validator. :Returns: **The validated Pydantic model.** .. py:method:: __get_pydantic_core_schema__(source, handler, /) :classmethod: Hook into generating the model's CoreSchema. :param source: The class we are generating a schema for. This will generally be the same as the `cls` argument if this is a classmethod. :param handler: A callable that calls into Pydantic's internal CoreSchema generation logic. :Returns: **A `pydantic-core` `CoreSchema`.** .. py:method:: __get_pydantic_json_schema__(core_schema, handler, /) :classmethod: Hook into generating the model's JSON schema. :param core_schema: A `pydantic-core` CoreSchema. You can ignore this argument and call the handler with a new CoreSchema, wrap this CoreSchema (`{'type': 'nullable', 'schema': current_schema}`), or just call the handler with the original schema. :param handler: Call into Pydantic's internal JSON schema generation. This will raise a `pydantic.errors.PydanticInvalidForJsonSchema` if JSON schema generation fails. Since this gets called by `BaseModel.model_json_schema` you can override the `schema_generator` argument to that function to change JSON schema generation globally for a type. :Returns: **A JSON schema, as a Python object.** .. py:method:: __pydantic_init_subclass__(**kwargs) :classmethod: This is intended to behave just like `__init_subclass__`, but is called by `ModelMetaclass` only after the class is actually fully initialized. In particular, attributes like `model_fields` will be present when this is called. This is necessary because `__init_subclass__` will always be called by `type.__new__`, and it would require a prohibitively large refactor to the `ModelMetaclass` to ensure that `type.__new__` was called in such a manner that the class would already be sufficiently initialized. This will receive the same `kwargs` that would be passed to the standard `__init_subclass__`, namely, any kwargs passed to the class definition that aren't used internally by pydantic. :param \*\*kwargs: Any keyword arguments passed to the class definition that aren't used internally by pydantic. .. py:method:: __class_getitem__(typevar_values) :classmethod: .. py:method:: __copy__() Returns a shallow copy of the model. .. py:method:: __deepcopy__(memo = None) Returns a deep copy of the model. .. py:method:: __getattr__(item) .. py:method:: _check_frozen(name, value) .. py:method:: __getstate__() .. py:method:: __setstate__(state) .. py:method:: __eq__(other) .. py:method:: __init_subclass__(**kwargs) :classmethod: This signature is included purely to help type-checkers check arguments to class declaration, which provides a way to conveniently set model_config key/value pairs. ```py from pydantic import BaseModel class MyModel(BaseModel, extra='allow'): ... ``` However, this may be deceiving, since the _actual_ calls to `__init_subclass__` will not receive any of the config arguments, and will only receive any keyword arguments passed during class initialization that are _not_ expected keys in ConfigDict. (This is due to the way `ModelMetaclass.__new__` works.) :param \*\*kwargs: Keyword arguments passed to the class definition, which set model_config .. note:: You may want to override `__pydantic_init_subclass__` instead, which behaves similarly but is called *after* the class is fully initialized. .. py:method:: __iter__() So `dict(model)` works. .. py:method:: __repr__() .. py:method:: __repr_args__() .. py:attribute:: __repr_name__ .. py:attribute:: __repr_str__ .. py:attribute:: __pretty__ .. py:attribute:: __rich_repr__ .. py:method:: __str__() .. py:property:: __fields__ :type: dict[str, pydantic.fields.FieldInfo] .. py:property:: __fields_set__ :type: set[str] .. py:method:: dict(*, include = None, exclude = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False) .. py:method:: json(*, include = None, exclude = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, encoder = PydanticUndefined, models_as_dict = PydanticUndefined, **dumps_kwargs) .. py:method:: parse_obj(obj) :classmethod: .. py:method:: parse_raw(b, *, content_type = None, encoding = 'utf8', proto = None, allow_pickle = False) :classmethod: .. py:method:: parse_file(path, *, content_type = None, encoding = 'utf8', proto = None, allow_pickle = False) :classmethod: .. py:method:: from_orm(obj) :classmethod: .. py:method:: construct(_fields_set = None, **values) :classmethod: .. py:method:: copy(*, include = None, exclude = None, update = None, deep = False) Returns a copy of the model. !!! warning "Deprecated" This method is now deprecated; use `model_copy` instead. If you need `include` or `exclude`, use: ```py data = self.model_dump(include=include, exclude=exclude, round_trip=True) data = {**data, **(update or {})} copied = self.model_validate(data) ``` :param include: Optional set or mapping specifying which fields to include in the copied model. :param exclude: Optional set or mapping specifying which fields to exclude in the copied model. :param update: Optional dictionary of field-value pairs to override field values in the copied model. :param deep: If True, the values of fields that are Pydantic models will be deep-copied. :Returns: **A copy of the model with included, excluded and updated fields as specified.** .. py:method:: schema(by_alias = True, ref_template = DEFAULT_REF_TEMPLATE) :classmethod: .. py:method:: schema_json(*, by_alias = True, ref_template = DEFAULT_REF_TEMPLATE, **dumps_kwargs) :classmethod: .. py:method:: validate(value) :classmethod: .. py:method:: update_forward_refs(**localns) :classmethod: .. py:method:: _iter(*args, **kwargs) .. py:method:: _copy_and_set_values(*args, **kwargs) .. py:method:: _get_value(*args, **kwargs) :classmethod: .. py:method:: _calculate_keys(*args, **kwargs) .. py:class:: ConfigMetaCAT(/, **data) Bases: :py:obj:`medcat.config.config.ComponentConfig` The MetaCAT part of the config .. py:attribute:: comp_name :type: str :value: 'meta_cat' The name of the component. If a custom implementation is required, it needs to be registered using `medcat.components.types.register_core_component( , , ) By default, only the 'default' component is registered. .. py:attribute:: general :type: General .. py:attribute:: model :type: Model .. py:attribute:: train :type: Train .. py:class:: Config .. py:attribute:: extra :value: 'allow' .. py:attribute:: validate_assignment :value: True .. py:attribute:: _is_dirty :type: bool :value: False .. py:method:: __setattr__(name, value) .. py:property:: is_dirty :type: bool .. py:method:: mark_clean() .. py:method:: get_strategy() .. py:method:: get_init_attrs() :classmethod: .. py:method:: ignore_attrs() :classmethod: .. py:method:: include_properties() :classmethod: .. py:method:: merge_config(other) Merge this config with another config's (partial) model dump. The exepctation is that the `other` dict is a partial model dump. Values specified there are overwritten into the current config. Values not specified there are left intact. The `other` config can have keys/values that do not exist in the config or sub-config. And they will be added where possible. :param other: The model dump :type other: dict :raises IncorrectConfigValues: If unable to set the attribute, trying to set incorrect value, or trying to set sub-config values in an incorrect format (non-dict). .. py:method:: load(path) :classmethod: .. py:attribute:: model_config :type: ClassVar[pydantic.config.ConfigDict] Configuration for the model, should be a dictionary conforming to [`ConfigDict`][pydantic.config.ConfigDict]. .. py:attribute:: model_fields :type: ClassVar[Dict[str, pydantic.fields.FieldInfo]] Metadata about the fields defined on the model, mapping of field names to [`FieldInfo`][pydantic.fields.FieldInfo] objects. This replaces `Model.__fields__` from Pydantic V1. .. py:attribute:: model_computed_fields :type: ClassVar[Dict[str, pydantic.fields.ComputedFieldInfo]] A dictionary of computed field names and their corresponding `ComputedFieldInfo` objects. .. py:attribute:: __class_vars__ :type: ClassVar[set[str]] The names of the class variables defined on the model. .. py:attribute:: __private_attributes__ :type: ClassVar[Dict[str, pydantic.fields.ModelPrivateAttr]] Metadata about the private attributes of the model. .. py:attribute:: __signature__ :type: ClassVar[inspect.Signature] The synthesized `__init__` [`Signature`][inspect.Signature] of the model. .. py:attribute:: __pydantic_complete__ :type: ClassVar[bool] :value: False Whether model building is completed, or if there are still undefined fields. .. py:attribute:: __pydantic_core_schema__ :type: ClassVar[pydantic_core.CoreSchema] The core schema of the model. .. py:attribute:: __pydantic_custom_init__ :type: ClassVar[bool] Whether the model has a custom `__init__` method. .. py:attribute:: __pydantic_decorators__ :type: ClassVar[pydantic._internal._decorators.DecoratorInfos] Metadata containing the decorators defined on the model. This replaces `Model.__validators__` and `Model.__root_validators__` from Pydantic V1. .. py:attribute:: __pydantic_generic_metadata__ :type: ClassVar[pydantic._internal._generics.PydanticGenericMetadata] Metadata for generic models; contains data used for a similar purpose to __args__, __origin__, __parameters__ in typing-module generics. May eventually be replaced by these. .. py:attribute:: __pydantic_parent_namespace__ :type: ClassVar[Dict[str, Any] | None] :value: None Parent namespace of the model, used for automatic rebuilding of models. .. py:attribute:: __pydantic_post_init__ :type: ClassVar[None | Literal['model_post_init']] The name of the post-init method for the model, if defined. .. py:attribute:: __pydantic_root_model__ :type: ClassVar[bool] :value: False Whether the model is a [`RootModel`][pydantic.root_model.RootModel]. .. py:attribute:: __pydantic_serializer__ :type: ClassVar[pydantic_core.SchemaSerializer] The `pydantic-core` `SchemaSerializer` used to dump instances of the model. .. py:attribute:: __pydantic_validator__ :type: ClassVar[pydantic_core.SchemaValidator | pydantic.plugin._schema_validator.PluggableSchemaValidator] The `pydantic-core` `SchemaValidator` used to validate instances of the model. .. py:attribute:: __pydantic_extra__ :type: dict[str, Any] | None A dictionary containing extra values, if [`extra`][pydantic.config.ConfigDict.extra] is set to `'allow'`. .. py:attribute:: __pydantic_fields_set__ :type: set[str] The names of fields explicitly set during instantiation. .. py:attribute:: __pydantic_private__ :type: dict[str, Any] | None Values of private attributes set on the model instance. .. py:attribute:: __slots__ :value: ('__dict__', '__pydantic_fields_set__', '__pydantic_extra__', '__pydantic_private__') .. py:method:: __init__(/, **data) Create a new model by parsing and validating input data from keyword arguments. Raises [`ValidationError`][pydantic_core.ValidationError] if the input data cannot be validated to form a valid model. `self` is explicitly positional-only to allow `self` as a field name. .. py:property:: model_extra :type: dict[str, Any] | None Get extra fields set during validation. :Returns: **A dictionary of extra fields, or `None` if `config.extra` is not set to `"allow"`.** .. py:property:: model_fields_set :type: set[str] Returns the set of fields that have been explicitly set on this model instance. :Returns: **A set of strings representing the fields that have been set,** -- i.e. that were not filled from defaults. .. py:method:: model_construct(_fields_set = None, **values) :classmethod: Creates a new instance of the `Model` class with validated data. Creates a new model setting `__dict__` and `__pydantic_fields_set__` from trusted or pre-validated data. Default values are respected, but no other validation is performed. !!! note `model_construct()` generally respects the `model_config.extra` setting on the provided model. That is, if `model_config.extra == 'allow'`, then all extra passed values are added to the model instance's `__dict__` and `__pydantic_extra__` fields. If `model_config.extra == 'ignore'` (the default), then all extra passed values are ignored. Because no validation is performed with a call to `model_construct()`, having `model_config.extra == 'forbid'` does not result in an error if extra values are passed, but they will be ignored. :param _fields_set: A set of field names that were originally explicitly set during instantiation. If provided, this is directly used for the [`model_fields_set`][pydantic.BaseModel.model_fields_set] attribute. Otherwise, the field names from the `values` argument will be used. :param values: Trusted or pre-validated data dictionary. :Returns: **A new instance of the `Model` class with validated data.** .. py:method:: model_copy(*, update = None, deep = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#model_copy Returns a copy of the model. :param update: Values to change/add in the new model. Note: the data is not validated before creating the new model. You should trust this data. :param deep: Set to `True` to make a deep copy of the model. :Returns: **New model instance.** .. py:method:: model_dump(*, mode = 'python', include = None, exclude = None, context = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, round_trip = False, warnings = True, serialize_as_any = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#modelmodel_dump Generate a dictionary representation of the model, optionally specifying which fields to include or exclude. :param mode: The mode in which `to_python` should run. If mode is 'json', the output will only contain JSON serializable types. If mode is 'python', the output may contain non-JSON-serializable Python objects. :param include: A set of fields to include in the output. :param exclude: A set of fields to exclude from the output. :param context: Additional context to pass to the serializer. :param by_alias: Whether to use the field's alias in the dictionary key if defined. :param exclude_unset: Whether to exclude fields that have not been explicitly set. :param exclude_defaults: Whether to exclude fields that are set to their default value. :param exclude_none: Whether to exclude fields that have a value of `None`. :param round_trip: If True, dumped values should be valid as input for non-idempotent types such as Json[T]. :param warnings: How to handle serialization errors. False/"none" ignores them, True/"warn" logs errors, "error" raises a [`PydanticSerializationError`][pydantic_core.PydanticSerializationError]. :param serialize_as_any: Whether to serialize fields with duck-typing serialization behavior. :Returns: **A dictionary representation of the model.** .. py:method:: model_dump_json(*, indent = None, include = None, exclude = None, context = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, round_trip = False, warnings = True, serialize_as_any = False) Usage docs: https://docs.pydantic.dev/2.9/concepts/serialization/#modelmodel_dump_json Generates a JSON representation of the model using Pydantic's `to_json` method. :param indent: Indentation to use in the JSON output. If None is passed, the output will be compact. :param include: Field(s) to include in the JSON output. :param exclude: Field(s) to exclude from the JSON output. :param context: Additional context to pass to the serializer. :param by_alias: Whether to serialize using field aliases. :param exclude_unset: Whether to exclude fields that have not been explicitly set. :param exclude_defaults: Whether to exclude fields that are set to their default value. :param exclude_none: Whether to exclude fields that have a value of `None`. :param round_trip: If True, dumped values should be valid as input for non-idempotent types such as Json[T]. :param warnings: How to handle serialization errors. False/"none" ignores them, True/"warn" logs errors, "error" raises a [`PydanticSerializationError`][pydantic_core.PydanticSerializationError]. :param serialize_as_any: Whether to serialize fields with duck-typing serialization behavior. :Returns: **A JSON string representation of the model.** .. py:method:: model_json_schema(by_alias = True, ref_template = DEFAULT_REF_TEMPLATE, schema_generator = GenerateJsonSchema, mode = 'validation') :classmethod: Generates a JSON schema for a model class. :param by_alias: Whether to use attribute aliases or not. :param ref_template: The reference template. :param schema_generator: To override the logic used to generate the JSON schema, as a subclass of `GenerateJsonSchema` with your desired modifications :param mode: The mode in which to generate the schema. :Returns: **The JSON schema for the given model class.** .. py:method:: model_parametrized_name(params) :classmethod: Compute the class name for parametrizations of generic classes. This method can be overridden to achieve a custom naming scheme for generic BaseModels. :param params: Tuple of types of the class. Given a generic class `Model` with 2 type variables and a concrete model `Model[str, int]`, the value `(str, int)` would be passed to `params`. :Returns: **String representing the new class where `params` are passed to `cls` as type variables.** :raises TypeError: Raised when trying to generate concrete names for non-generic models. .. py:method:: model_post_init(__context) Override this method to perform additional initialization after `__init__` and `model_construct`. This is useful if you want to do some validation that requires the entire model to be initialized. .. py:method:: model_rebuild(*, force = False, raise_errors = True, _parent_namespace_depth = 2, _types_namespace = None) :classmethod: Try to rebuild the pydantic-core schema for the model. This may be necessary when one of the annotations is a ForwardRef which could not be resolved during the initial attempt to build the schema, and automatic rebuilding fails. :param force: Whether to force the rebuilding of the model schema, defaults to `False`. :param raise_errors: Whether to raise errors, defaults to `True`. :param _parent_namespace_depth: The depth level of the parent namespace, defaults to 2. :param _types_namespace: The types namespace, defaults to `None`. :Returns: * **Returns `None` if the schema is already "complete" and rebuilding was not required.** * **If rebuilding _was_ required, returns `True` if rebuilding was successful, otherwise `False`.** .. py:method:: model_validate(obj, *, strict = None, from_attributes = None, context = None) :classmethod: Validate a pydantic model instance. :param obj: The object to validate. :param strict: Whether to enforce types strictly. :param from_attributes: Whether to extract data from object attributes. :param context: Additional context to pass to the validator. :raises ValidationError: If the object could not be validated. :Returns: **The validated model instance.** .. py:method:: model_validate_json(json_data, *, strict = None, context = None) :classmethod: Usage docs: https://docs.pydantic.dev/2.9/concepts/json/#json-parsing Validate the given JSON data against the Pydantic model. :param json_data: The JSON data to validate. :param strict: Whether to enforce types strictly. :param context: Extra variables to pass to the validator. :Returns: **The validated Pydantic model.** :raises ValidationError: If `json_data` is not a JSON string or the object could not be validated. .. py:method:: model_validate_strings(obj, *, strict = None, context = None) :classmethod: Validate the given object with string data against the Pydantic model. :param obj: The object containing string data to validate. :param strict: Whether to enforce types strictly. :param context: Extra variables to pass to the validator. :Returns: **The validated Pydantic model.** .. py:method:: __get_pydantic_core_schema__(source, handler, /) :classmethod: Hook into generating the model's CoreSchema. :param source: The class we are generating a schema for. This will generally be the same as the `cls` argument if this is a classmethod. :param handler: A callable that calls into Pydantic's internal CoreSchema generation logic. :Returns: **A `pydantic-core` `CoreSchema`.** .. py:method:: __get_pydantic_json_schema__(core_schema, handler, /) :classmethod: Hook into generating the model's JSON schema. :param core_schema: A `pydantic-core` CoreSchema. You can ignore this argument and call the handler with a new CoreSchema, wrap this CoreSchema (`{'type': 'nullable', 'schema': current_schema}`), or just call the handler with the original schema. :param handler: Call into Pydantic's internal JSON schema generation. This will raise a `pydantic.errors.PydanticInvalidForJsonSchema` if JSON schema generation fails. Since this gets called by `BaseModel.model_json_schema` you can override the `schema_generator` argument to that function to change JSON schema generation globally for a type. :Returns: **A JSON schema, as a Python object.** .. py:method:: __pydantic_init_subclass__(**kwargs) :classmethod: This is intended to behave just like `__init_subclass__`, but is called by `ModelMetaclass` only after the class is actually fully initialized. In particular, attributes like `model_fields` will be present when this is called. This is necessary because `__init_subclass__` will always be called by `type.__new__`, and it would require a prohibitively large refactor to the `ModelMetaclass` to ensure that `type.__new__` was called in such a manner that the class would already be sufficiently initialized. This will receive the same `kwargs` that would be passed to the standard `__init_subclass__`, namely, any kwargs passed to the class definition that aren't used internally by pydantic. :param \*\*kwargs: Any keyword arguments passed to the class definition that aren't used internally by pydantic. .. py:method:: __class_getitem__(typevar_values) :classmethod: .. py:method:: __copy__() Returns a shallow copy of the model. .. py:method:: __deepcopy__(memo = None) Returns a deep copy of the model. .. py:method:: __getattr__(item) .. py:method:: _check_frozen(name, value) .. py:method:: __getstate__() .. py:method:: __setstate__(state) .. py:method:: __eq__(other) .. py:method:: __init_subclass__(**kwargs) :classmethod: This signature is included purely to help type-checkers check arguments to class declaration, which provides a way to conveniently set model_config key/value pairs. ```py from pydantic import BaseModel class MyModel(BaseModel, extra='allow'): ... ``` However, this may be deceiving, since the _actual_ calls to `__init_subclass__` will not receive any of the config arguments, and will only receive any keyword arguments passed during class initialization that are _not_ expected keys in ConfigDict. (This is due to the way `ModelMetaclass.__new__` works.) :param \*\*kwargs: Keyword arguments passed to the class definition, which set model_config .. note:: You may want to override `__pydantic_init_subclass__` instead, which behaves similarly but is called *after* the class is fully initialized. .. py:method:: __iter__() So `dict(model)` works. .. py:method:: __repr__() .. py:method:: __repr_args__() .. py:attribute:: __repr_name__ .. py:attribute:: __repr_str__ .. py:attribute:: __pretty__ .. py:attribute:: __rich_repr__ .. py:method:: __str__() .. py:property:: __fields__ :type: dict[str, pydantic.fields.FieldInfo] .. py:property:: __fields_set__ :type: set[str] .. py:method:: dict(*, include = None, exclude = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False) .. py:method:: json(*, include = None, exclude = None, by_alias = False, exclude_unset = False, exclude_defaults = False, exclude_none = False, encoder = PydanticUndefined, models_as_dict = PydanticUndefined, **dumps_kwargs) .. py:method:: parse_obj(obj) :classmethod: .. py:method:: parse_raw(b, *, content_type = None, encoding = 'utf8', proto = None, allow_pickle = False) :classmethod: .. py:method:: parse_file(path, *, content_type = None, encoding = 'utf8', proto = None, allow_pickle = False) :classmethod: .. py:method:: from_orm(obj) :classmethod: .. py:method:: construct(_fields_set = None, **values) :classmethod: .. py:method:: copy(*, include = None, exclude = None, update = None, deep = False) Returns a copy of the model. !!! warning "Deprecated" This method is now deprecated; use `model_copy` instead. If you need `include` or `exclude`, use: ```py data = self.model_dump(include=include, exclude=exclude, round_trip=True) data = {**data, **(update or {})} copied = self.model_validate(data) ``` :param include: Optional set or mapping specifying which fields to include in the copied model. :param exclude: Optional set or mapping specifying which fields to exclude in the copied model. :param update: Optional dictionary of field-value pairs to override field values in the copied model. :param deep: If True, the values of fields that are Pydantic models will be deep-copied. :Returns: **A copy of the model with included, excluded and updated fields as specified.** .. py:method:: schema(by_alias = True, ref_template = DEFAULT_REF_TEMPLATE) :classmethod: .. py:method:: schema_json(*, by_alias = True, ref_template = DEFAULT_REF_TEMPLATE, **dumps_kwargs) :classmethod: .. py:method:: validate(value) :classmethod: .. py:method:: update_forward_refs(**localns) :classmethod: .. py:method:: _iter(*args, **kwargs) .. py:method:: _copy_and_set_values(*args, **kwargs) .. py:method:: _get_value(*args, **kwargs) :classmethod: .. py:method:: _calculate_keys(*args, **kwargs)